Trucks, Buses & Specialty Vehicles

Siemens and IFPEN extend long-lasting partnership to accelerate decarbonized mobility

January 9, 2023

In December 2022, Siemens Digital Industries Software and IFP Energies nouvelles (IFPEN) have renewed the partnership contract, adding a new…

By Chiel Verhoeven

2 MIN READ

Using CAE fatigue methodology for design optimization and virtual validation

The three challenges of strength and durability analysis

December 13, 2022

Learn about the challenges of strength and durability and find out how to manage them effectively. With the right tools and processes, you can learn a lot about what happens within a structure and why.

By Michael Hack

4 MIN READ

Ensuring safety in AD/ADAS systems: 3 keys to avoid getting flooded by your data

December 2, 2022

By David Boyker, IVEX For car manufacturers, ensuring that AD/ADAS systems are safe requires collecting a lot of data. To…

By Eva Moysan

5 MIN READ

How the IFP-Drive library helps you explore innovative powertrains

November 23, 2022

One could say that system simulation’s purpose is to get relatively accurate results quickly with little efforts and few input…

By Romain Nicolas

4 MIN READ

Strength and fatigue adhering to the FKM Guidelines

October 17, 2022

The FKM guidelines are de facto a standard used to prevent material failures. The FKM wizard for Simcenter 3D Durability helps to comply with a streamlined workflow, which is laid out in the Post. It is newly available, free to download and free to use with Simcenter 3D Specialist Durability.

By Sebastian Flock and Michael Hack

6 MIN READ

Manage electric drive systems engineering like a flock of birds anticipating the next move

October 7, 2022

What has a flock of birds in common with managing electric drive systems engineering?

By Els Verlinden

6 MIN READ

Simcenter Testlab 2206: Virtual Prototype Assembly (VPA)

September 28, 2022

With Simcenter Testlab VPA, Test and Simulation engineers can quickly explore the performance of several assemblies without the need for a physical prototype. This allows for design updates in the early phases of the development cycle.

By Vinicius Goncalves

4 MIN READ

Electromagnetic simulations as part of your design process, that’s EMAG-nificent

July 21, 2022

Electromagnetics (EMAG) and electrical engineers are at home with streamlined EMAG Computer Aided Engineering (CAE) packages, like Simcenter SPEED, Simcenter…

By John Wanjiku and Jonathan Melvin

5 MIN READ

Powder Bed fusion: Simulation with an iterative approach to improve compensation.

July 4, 2022

Powder Bed Fusion is a layer-by-layer and line-by-line welding process. Like any other welding process, it will create large amounts…

By Michael Hajduk

3 MIN READ