Daniel Santoro

IT Applications Developer Lead (Delta Team) at Siemens Digital Industries Software.

test

test

October 25, 2021
By Danny Santoro
< 1 MIN READ
NX CAM Cloud Connected software

NX CAM Cloud Connected software

January 30, 2020
Our NX Cloud Connected subscription-based products enable you to use our advanced NX CAM software at a lower cost.  The...
By Danny Santoro
< 1 MIN READ
3D printing for industrial with Siemens Additive Manufacturing

3D printing for industrial with Siemens Additive Manufacturing

December 16, 2019
For Industrial Additive Manufacturing, the Siemens Digital Enterprise Portfolio is extensive and provides a massive amount of powerful features for...
By Danny Santoro
< 1 MIN READ
Precise, Digital and Flexible – Simulation-based force compensation helps robots perform accurate milling jobs

Precise, Digital and Flexible – Simulation-based force compensation helps robots perform accurate milling jobs

December 5, 2019
Robotic Machining has always been limited by the achievable accuracies. Simulation of the machining process and calculation of the corresponding...
By Danny Santoro
< 1 MIN READ
Deliver top quality injection molds 40% faster with end-to-end digitalization

Deliver top quality injection molds 40% faster with end-to-end digitalization

October 3, 2019
Listen to the new on-demand webinar, “Deliver top quality injection molds 40% faster with end-to-end digitalization.” Register now! In this...
By Danny Santoro
< 1 MIN READ
Siemens NX expert shares tooling wizard best practices

Siemens NX expert shares tooling wizard best practices

September 10, 2019
Kevin Jongsma, NX Designer and Programmer, from Intelligent Design and Services, shares his best practices in tooling wizards, Mold Wizard and Die Wizard. Watch this video to get his tips...
By Danny Santoro
< 1 MIN READ
Siemens Partner Focus: Ralf Stetter, A+B Solutions

Siemens Partner Focus: Ralf Stetter, A+B Solutions

September 9, 2019
  We had the pleasure of speaking with Ralf Stetter, Owner and Managing Director of A+B Solutions, at Realize LIVE 2019 to learn about the Siemens partnership and highlights of the presentatio...
By Danny Santoro
< 1 MIN READ
Streamline Mill-turning of Large Complex Parts

Streamline Mill-turning of Large Complex Parts

August 8, 2019
Realize LIVE 2019 Streamline Mill-turning of Large Complex Parts In this three minute video, Matt Triplett, Sr. Manager, Toshiba Machine America, explains how Siemens NX software and the...
By Danny Santoro
< 1 MIN READ
The Digital Enterprise Explained

The Digital Enterprise Explained

August 5, 2019
More flexible production, greater productivity, and the development of new business models are all possible today thanks to digital solutions. But the future of industry offers even more potential: C...
By Danny Santoro
< 1 MIN READ
Virtual CNC Machining demonstration

Virtual CNC Machining demonstration

July 26, 2019
Watch this short, impromptu, Virtual CNC Machining demonstration by Matthias Leinberger, Director, Business Development, Siemens Digital Industries Software, at Realize LIVE, June 2019. ...
By Danny Santoro
< 1 MIN READ
What’s New in NX CAM – Mold and Die Machining

What’s New in NX CAM – Mold and Die Machining

March 15, 2019
Watch our video highlighting the new mold & die machining capabilities in NX CAM software.  Learn about: Bottom Up Cutting Minimum Cut Depth Open and Closed Area Region Co...
By Danny Santoro
< 1 MIN READ
Evektor maintains industry leadership with Axiom Tech & Siemens’ software solutions

Evektor maintains industry leadership with Axiom Tech & Siemens’ software solutions

March 11, 2019
This video was created by Siemens partner, Axiom Tech, to highlight the success of customer, Evektor, with their use of Siemens' software solutions.  A complete transcript of the video can be fo...
By Danny Santoro
< 1 MIN READ
Watch the newest tech tips videos about NX CAM software

Watch the newest tech tips videos about NX CAM software

January 24, 2019
Are you curious about what’s new in the latest version of NX CAM (January 2019)?   Watch the series of “tech tip” videos to learn how the capabilities will help you gain productivity and im...
By Danny Santoro
< 1 MIN READ
Round up of Digital Enterprise Factory Showcase Tour videos

Round up of Digital Enterprise Factory Showcase Tour videos

October 24, 2018
Now you can find all of our Digital Enterprise Factory Showcase blogs in one place.  Click on the links below to view the videos and learn more about how to use Siemens PLM software to become mo...
By Danny Santoro
< 1 MIN READ
Case study: Accelerating time to market through digitalization

Case study: Accelerating time to market through digitalization

September 20, 2018
Enjoy the video version of the Akevono Kohgyo case study.  Watch and learn how Siemens' NX software enables this Japanese machining specialist to easily utilize customer data to effectively...
By Danny Santoro
< 1 MIN READ
Video: Digitalization in CNC manufacturing

Video: Digitalization in CNC manufacturing

August 23, 2018
Are you going to IMTS 2018? Learn about how Siemens and Toshiba Machine Co can help you stay on the cutting edge of CNC manufacturing.  You'll find Siemens in booth 134500 (...
By Danny Santoro
< 1 MIN READ
NX for manufacturing: Enhanced mold and die machining in NX CAM 12.0.2

NX for manufacturing: Enhanced mold and die machining in NX CAM 12.0.2

August 13, 2018
NX CAM 12.0.2 is available now! In this video you will learn about enhanced mold and die machining in the latest version of our software.  Hello!  I’m Alex...
By Danny Santoro
< 1 MIN READ
The potential for the machine shop of the future is here!

The potential for the machine shop of the future is here!

August 6, 2018
Watch this short video series which explains how digitalizing end-to-end manufacturing using unified next-generation technologies for CAM, CNC, robotics, and 3D printing can help transform and expone...
By Danny Santoro
< 1 MIN READ
Why Did Avant Manufacturing Choose NX Software?

Why Did Avant Manufacturing Choose NX Software?

June 28, 2018
Avant Manufacturing is a small manufacturing company with big ambitions. Avant is currently a one-machine, one-man, one-dog operation, which was founded in late 2015. CNC milling is the main service ...
By Danny Santoro
< 1 MIN READ
Siemens NX software continuous release delivery

Siemens NX software continuous release delivery

June 27, 2018
Siemens PLM Software will begin delivering its NX software product using a Continuous Release methodology in January 2019. This new delivery model will give our customers faster access to new enhance...
By Danny Santoro
< 1 MIN READ
VERICUT Offers Seamless Integration with Siemens Software

VERICUT Offers Seamless Integration with Siemens Software

April 9, 2018
CG Tech’s VERICUT, an industry standard for simulating CNC machining in order to detect errors, potential collisions, or areas of inefficiency, and the Siemens Teamcenter interface run independently ...
By Danny Santoro
< 1 MIN READ
Expanded additive manufacturing tools in NX 12 for manufacturing

Expanded additive manufacturing tools in NX 12 for manufacturing

November 16, 2017
In this video you'll hear about the new additive manufacturing tools in NX 12 for manufacturing.  Let us know what you think in the Comment section below. Additional Inf...
By Danny Santoro
< 1 MIN READ
Siemens NX 12: Unleash Your Innovation

Siemens NX 12: Unleash Your Innovation

November 10, 2017
Building on its legacy of best-in-class customer deployment readiness and data preservation, the latest version of Siemens  NX, NX 12, delivers the next generation of design, simulation and man...
By Danny Santoro
< 1 MIN READ
Industrial 3D Metal Printing at toolcraft – Siemens NX for Additive Manufacturing

Industrial 3D Metal Printing at toolcraft – Siemens NX for Additive Manufacturing

November 7, 2017
Christoph Hauck, Managing Director of toolcraft GmbH, discusses how they are using Siemens NX to aid in industrializing additive manufacturing (3D printing). By using Siemens NX, they are able to per...
By Danny Santoro
< 1 MIN READ
Next Generation Mold & Die Machining with NX CAM

Next Generation Mold & Die Machining with NX CAM

October 30, 2017
Watch our video series describing exciting new capabilities in NX CAM 12.  The complete "Next Generation Mold & Die Machining with NX CAM" video transcript appears below the video link....
By Danny Santoro
< 1 MIN READ
Video: Digitalization boosts part manufacturing efficiency

Video: Digitalization boosts part manufacturing efficiency

October 20, 2017
Watch the video, "Digitalization boosts part manufacturing efficiency," to learn how ASM Pacific Technology, the world's largest supplier of semiconductor, LED, and packaging equipment, standardized ...
By Danny Santoro
< 1 MIN READ
Siemens digitalization solutions for machine tool users

Siemens digitalization solutions for machine tool users

September 29, 2017
 Siemens presented highlights around digitalization, automation and technology for machine tool users --from the design process through production planning and execution up to services -- at EMO...
By Danny Santoro
< 1 MIN READ
Supercharge your machining productivity with NX CAM software

Supercharge your machining productivity with NX CAM software

September 27, 2017
Program any job and maximize manufacturing performance for CNC machining, robotics and additive manufacturing with NX CAM software. Watch this presentation, "Supercharge your machining p...
By Danny Santoro
< 1 MIN READ
Video: Siemens NX AM for HP Multi Jet Fusion 3D Printers

Video: Siemens NX AM for HP Multi Jet Fusion 3D Printers

September 6, 2017
Watch the demonstation video about NX AM for HP Multi Jet Fusion 3D Printers.  Use NX to setup print jobs for HP Jet Fusion 4200 3D Printers: Prepare print jobs with bu...
By Danny Santoro
< 1 MIN READ
Freeform Technology Offers Best Quality, Lead Times with NX

Freeform Technology Offers Best Quality, Lead Times with NX

August 31, 2017
Freeform Technology Ltd. provides composite tooling, project management, and model-making solutions for a variety of clients. NX enables them to offer their customers the best quality and turnaround ...
By Danny Santoro
< 1 MIN READ
Video: From design to delivery with Siemens PLM Software

Video: From design to delivery with Siemens PLM Software

August 10, 2017
PM Bearings, a  leading innovator in high-precision linear  bearingsand positioning systems,uses an integrated set of Siemens PLM Software solutions (NX CAD, NX CAM, Simcenter...
By Danny Santoro
< 1 MIN READ
The Digital Machine Shop video series

The Digital Machine Shop video series

May 8, 2017
You can access all of Armin Gruenewald's videos in the Digital Machine Shop blog series here.Let us know what you think in the comment section below. Introducing the Digital Machine...
By Danny Santoro
< 1 MIN READ
A vision of Siemens Part Manufacturing Platform in action

A vision of Siemens Part Manufacturing Platform in action

May 2, 2017
Below you will find the transcript from the video. In a factory somewhere.  A MindSphere Alert!  Anomaly on machine #17.  “We have a problem. Dispatch a technician to check machine #...
By Danny Santoro
< 1 MIN READ
Siemens Part Manufacturing Platform for additive manufacturing

Siemens Part Manufacturing Platform for additive manufacturing

April 24, 2017
Introducing Siemens part manufacturing platform We believe in the power of digitalization to bring people and technology together.   To create what’s next.  Introducing Siemens part ...
By Danny Santoro
< 1 MIN READ
Additive Manufacturing and Digitalization

Additive Manufacturing and Digitalization

March 14, 2017
Watch this exciting two minute video to better understand additive manufacturing and digitalization.You can find much more information at www.siemens.com/plm/additivemanufacturing. &nbs...
By Danny Santoro
< 1 MIN READ
Additive Manufacturing and Machining – The integrated Siemens process chain in practice.

Additive Manufacturing and Machining – The integrated Siemens process chain in practice.

February 9, 2017
Siemens customer Hoedtke GmbH & Co. KG is one of the first manufacturing companies using an industry-standard Directed Energy Deposition (DED) overall solution -- from the CAD/CAE/CAM process (wi...
By Danny Santoro
< 1 MIN READ
Video: Partnerships that drive the industrialization of additive manufacturing

Video: Partnerships that drive the industrialization of additive manufacturing

January 16, 2017
The combination of subtractive machining processes and multi-axis deposition methods is one of the key areas of advanced software development that Vynce Paradise, Head of Advanced Part Manufacturing,...
By Danny Santoro
< 1 MIN READ
Materialise and Siemens PLM: Innovators you can count on

Materialise and Siemens PLM: Innovators you can count on

January 11, 2017
  Watch this brief video of Andreas Saar, VP of Additive Manufacturing, Siemens PLM Software, discussing Additive Manufacturing with Stefaan Motte, VP of Software, Materialise, during the Form...
By Danny Santoro
< 1 MIN READ
Demonstration: Additive Manufacturing Reshapes Everything

Demonstration: Additive Manufacturing Reshapes Everything

October 21, 2016
  Watch this movie to learn how digitalization and our Smart Innovation portfolio transform design and manufacturing -- but even more so than that -- how it enables us to reimagine products as...
By Danny Santoro
< 1 MIN READ
Digitalized mold making fuels growth at Haidlmair

Digitalized mold making fuels growth at Haidlmair

August 31, 2016
Presenting "Digitalized mold making fuels growth at Haidlmair," a Siemens PLM Software success story. Haidlmair is a group of companies based in mold-making. That’s what my father ...
By Danny Santoro
< 1 MIN READ
Video: NX 11 for Manufacturing Overview

Video: NX 11 for Manufacturing Overview

August 15, 2016
New manufacturing software technologies in NX 11 for Manufacturing can dramatically improve productivity and create new opportunities to transform your business. The robotics machining and groundbrea...
By Danny Santoro
< 1 MIN READ
Video: NX 11 for Manufacturing – Connect your digital machine shop

Video: NX 11 for Manufacturing – Connect your digital machine shop

August 10, 2016
View, "NX 11 for Manufacturing -- Connect your digital machine shop," narrated by Corsin Buerer, Director of Part Manufacturing Data Management, Siemens PLM Software.Corsin will tell you about...
By Danny Santoro
< 1 MIN READ
Video: NX 11 for Manufacturing – Highly efficient production machining

Video: NX 11 for Manufacturing – Highly efficient production machining

August 8, 2016
View our new video, "NX 11 for Manufacturing - Highly efficient production machining," narrated by Tom van 't Erve, Director of Development, NX CAM Prismatic Parts Machining, Siemens PLM Software. ...
By Danny Santoro
< 1 MIN READ
Video: NX 11 for Manufacturing – Robotic Machining with NX CAM

Video: NX 11 for Manufacturing – Robotic Machining with NX CAM

August 3, 2016
View the video, "NX 11 for Manufacturing - Robotic Machining with NX CAM," narrated by Vynce Paradise, Head of Mold/Die and Complex Machining, Siemens PLM Software. He talks about the new roboti...
By Danny Santoro
< 1 MIN READ
Digitalization Live: Practice check at the Siemens motor factory in Bad Neustadt, Germany

Digitalization Live: Practice check at the Siemens motor factory in Bad Neustadt, Germany

July 19, 2016
  Digitalization Live: Practice check at the Siemens motor factory in Bad Neustadt, Germany Brief summary of video: Digitalization Live The Siemens Bad Neustadt Motor Factory relies on t...
By Danny Santoro
< 1 MIN READ
Revolutionizing the future direction of 3D-printing

Revolutionizing the future direction of 3D-printing

May 17, 2016
This video, "Revolutionizing the future direction of 3D-printing,"shows an example of visual wear indication. It features an illustrative simulation of a functional design utilizing 3D-pr...
By Danny Santoro
< 1 MIN READ
Siemens & Local Motors: Advancing 3D-printing for real production

Siemens & Local Motors: Advancing 3D-printing for real production

May 5, 2016
    3D-printing is changing the world of manufacturing. It empowers designers to reimagine the way products are designed by changing how they are made. 3D printing helps compani...
By Danny Santoro
< 1 MIN READ
Video: Callaway designs clubs faster, so golfers can drive farther

Video: Callaway designs clubs faster, so golfers can drive farther

April 29, 2016
Callaway Golf has accelerated design, prototyping and testing of its clubs with the help of a Teamcenter innovation platform and NX CAD, CAM and CAE software. Today, Callaway develops clubs in months...
By Danny Santoro
< 1 MIN READ
Video: Optimized machining with robots

Video: Optimized machining with robots

December 17, 2015
In this video, "Optimized machining with robots -- using  NX CAM Robotics Programming, SINUMERIK Integrate, and Run MyRobot,"  Siemens‘ Michael Strahlberger and Matthias Leinberger explain ...
By Danny Santoro
< 1 MIN READ
Hybrid Additive Manufacturing with NX CAM Overview

Hybrid Additive Manufacturing with NX CAM Overview

November 2, 2015
Did you know that you can drive next generation hybrid machine tools with NX CAM? View this approximately two minute video, “Hybrid Additive Manufacturing with NX CAM Overview,” to glimpse the h...
By Danny Santoro
< 1 MIN READ
Video: Precision machining with Siemens’ NX CAM software

Video: Precision machining with Siemens’ NX CAM software

October 26, 2015
Precision Machining with Siemens NX CAM software View this new video, “Precision Machining with Siemens' NX,” to learn how Siemens NX solutions enable Manthorpe Engineering Ltd. to deliver...
By Danny Santoro
< 1 MIN READ
Video: Hybrid Manufacturing Defined: Gregory H. Hyatt, Ph.D., DMG MORI

Video: Hybrid Manufacturing Defined: Gregory H. Hyatt, Ph.D., DMG MORI

October 15, 2015
Gregory H. Hyatt, Ph.D., DMG MORI, Senior Vice President of Engineering and Chief Technology Officer, is featured in this four minute video, “Hybrid manufacturing defined,” in which he describes: &...
By Danny Santoro
< 1 MIN READ
Video: NX CAM Robotics Programming Overview

Video: NX CAM Robotics Programming Overview

October 8, 2015
View this 4-minute video to learn how to use Siemens NX CAM Robotics Programming. Siemens PLM Software has integrated its proven Tecnomatix® software for advanced robotic solutions with NX...
By Danny Santoro
< 1 MIN READ
Video: Additive & Hybrid Manufacturing = Changing the way products are made

Video: Additive & Hybrid Manufacturing = Changing the way products are made

October 2, 2015
  In this exciting 4-minute video, “Additive & Hybrid Manufacturing = Changing the way products are made,” Andreas Saar, VP of Manufacturing Engineering Solutions, describes how hybrid add...
By Danny Santoro
< 1 MIN READ
Video: Introduction to Additive Hybrid Manufacturing

Video: Introduction to Additive Hybrid Manufacturing

May 20, 2015
  NX Hybrid Additive Manufacturing NX™ software provides support for new hybrid-manufacturing technologies in which additive manufacturing (3D printing or metal deposition) is inc...
By Danny Santoro
< 1 MIN READ
Video: Andreas Saar on Hybrid Additive Manufacturing: A Game Changer

Video: Andreas Saar on Hybrid Additive Manufacturing: A Game Changer

May 15, 2015
Andreas Saar, Vice President – Manufacturing Engineering Solutions, Siemens PLM Software, discusses hybrid additive manufacturing in a new video title, “Hybrid Additive Manufacturing: A Game Changer....
By Danny Santoro
< 1 MIN READ
Quick Tour of Manufacturing 360 Tablet App

Quick Tour of Manufacturing 360 Tablet App

May 12, 2015
Manufacturing 360 is a tablet app that lets you explore advanced digital manufacturing technology. It is a gateway to all the latest information about our manufacturing software solutions.  &n...
By Danny Santoro
< 1 MIN READ
Siemens Brings Agile Software Development to NX CAM

Siemens Brings Agile Software Development to NX CAM

March 30, 2015
Agile software development promotes shorter release cycles and close collaboration with users, which encourages rapid and flexible response to the market needs. In this video, Siemen’s Yaron Riany, v...
By Danny Santoro
< 1 MIN READ
Video: PLM Integrated Part Manufacturing Solutions – CAD/CAM/CNC Process Chain

Video: PLM Integrated Part Manufacturing Solutions – CAD/CAM/CNC Process Chain

March 16, 2015
  In this video you’ll learn how, for more than 50 years, SINUMERIK CNCs and NX CAM Software solutions have been influencing the part manufacturing and machine tools market, and how the innova...
By Danny Santoro
< 1 MIN READ
The Future Digital Factory

The Future Digital Factory

March 12, 2015
In this short video, “The Future Digital Factory,” Zvi Feuer, Siemens PLM Software’s Senior Vice President, Digital Factory, Manufacturing Engineering Software, shares his perspective on how Siemens ...
By Danny Santoro
< 1 MIN READ
Download the Manufacturing 360 App and Learn More About Digital Manufacturing

Download the Manufacturing 360 App and Learn More About Digital Manufacturing

February 20, 2015
  The app is designed to let viewers explore the world of digital manufacturing while we explain how Siemens part and assembly manufacturing solutions enable more efficient and nimble operatio...
By Danny Santoro
< 1 MIN READ
NX 10 for Manufacturing – A Quick Overview

NX 10 for Manufacturing – A Quick Overview

January 14, 2015
Check out our new video. See what is new in NX 10 for Manufacturing by viewing a quick video that highlights the features of our suite of proven and integrated manufacturing software....
By Danny Santoro
< 1 MIN READ
PCB Routing Solutions: New Interactive Routing Styles

PCB Routing Solutions: New Interactive Routing Styles

January 9, 2015
As you may already know, the Xpedition VX.1 release is now available to customers. I encourage you to take some...
By Danny Santoro
< 1 MIN READ
NX CMM 10 – Reduce Inspection Programming Time & Increase Quality

NX CMM 10 – Reduce Inspection Programming Time & Increase Quality

December 18, 2014
You can create more efficient inspection programs faster with the new automated functions in NX CMM 10. See the highlights of the latest capabilities in NX CMM Inspection Programming: http://ow.ly/...
By Danny Santoro
< 1 MIN READ
NX CAM 10 – Real Solutions for Manufacturing Productivity

NX CAM 10 – Real Solutions for Manufacturing Productivity

December 9, 2014
New, advanced capabilities in NX CAM 10 let you program faster and machine higher-quality parts. Watch (and share) this short video that highlights the latest NC programming capabilities in NX C...
By Danny Santoro
< 1 MIN READ
See the NX for Manufacturing updates for NX 10

See the NX for Manufacturing updates for NX 10

December 2, 2014
T ake a quick look at this overview video, highlighting the updates to the manufacturing suite provided by the release of NX 10.  Updates are featured for CAM and CMM p...
By Danny Santoro
< 1 MIN READ
The FPGA Verification Window Is Open

The FPGA Verification Window Is Open

May 7, 2014
My Feb. 4 post introduced Mentor Graphics’ three-step FPGA verification process intended to help design teams get out of the...
By Danny Santoro
< 1 MIN READ
Just because FPGAs are programmable doesn’t mean verification is dead

Just because FPGAs are programmable doesn’t mean verification is dead

February 4, 2014
Marketing teams at FPGA vendors have been busy as the silicon nanometer geometry race escalates. Altera is “delivering the unimaginable”...
By Danny Santoro
< 1 MIN READ
NX CAM 9: Faster CNC programming for setups with multiple parts

NX CAM 9: Faster CNC programming for setups with multiple parts

October 11, 2013
  The new multiple-part programming capability in NX CAM 9 delivers faster programming for setups with multiple parts. For example, our studies conservatively estimate a 4X productivity i...
By Danny Santoro
< 1 MIN READ
NX CAM 9 preview: Take precise control over die-mold machining strategies

NX CAM 9 preview: Take precise control over die-mold machining strategies

October 2, 2013
  Cut Region Management is one the many new capabilities in NX CAM 9 for die-mold machining. With Cut Region Management, you get precise control over area milling cut regions and machinin...
By Danny Santoro
< 1 MIN READ
The Future of Design and Manufacturing?

The Future of Design and Manufacturing?

September 9, 2013
Elon Musk and SpaceX believe that there's a better and faster way to turn ideas in your mind into virtual models and then into real parts. And they've integrated various technologies (including NX) i...
By Danny Santoro
< 1 MIN READ
The Virtual Machine eliminates use of CNC machine tools for non-production tasks

The Virtual Machine eliminates use of CNC machine tools for non-production tasks

August 28, 2013
INDEX Group, one of the world’s leading manufacturers of CNC turning machines, wanted to increase the efficiency of multi-function production center setup, programming, and validation. INDEX implemen...
By Danny Santoro
< 1 MIN READ
Inside NX CAM’s Machine Tool Simulation

Inside NX CAM’s Machine Tool Simulation

August 12, 2013
See how you can verify your machining operations in NX CAM using integrated machine tool simualtion. The G-code driven simulation displays full material removal in your machining environment includin...
By Danny Santoro
< 1 MIN READ
Mazak 5-axis Machine Programmed with NX CAM

Mazak 5-axis Machine Programmed with NX CAM

July 29, 2013
VMH International, a Siemens PLM Software partner, shows a Mazak 5-axis machine programmed with NX CAM at IMTS 2012.
By Danny Santoro
< 1 MIN READ
Demonstration of NX Turbomachinery Milling

Demonstration of NX Turbomachinery Milling

July 26, 2013
NX Turbomachinery Milling simplifies the NC programming of complex 5-axis blisks and impellers for aero-engines, turbo-machinery and power generation equipment.   You can...
By Danny Santoro
< 1 MIN READ
Manufacturing software and equipment enable leading-edge process for personalizing medical devices

Manufacturing software and equipment enable leading-edge process for personalizing medical devices

July 24, 2013
Siemens’ image-to-implant (i2i) solution enables a highly automated engineer-to-order process for medical device companies who develop personalized products and therapies. Beginning with an MRI or CT...
By Danny Santoro
< 1 MIN READ
Driving CNCs with NX CAM at Joe Gibbs Racing

Driving CNCs with NX CAM at Joe Gibbs Racing

June 25, 2013
NX CAM has handled every multi-axis part Joe Gibbs has attempted. Every cylinder head is ported using this technology. The main reason why Joe Gibbs uses NX CAD/CAM is for the seamless integration be...
By Danny Santoro
< 1 MIN READ
Virtual Machine inside NX CAM

Virtual Machine inside NX CAM

May 30, 2013
The Virtual Machine Tool can be used for training, setup, postprocessed NC code validation and even manual editing of NC code just like at the real, physical machine. Machine tool builders that offer...
By Danny Santoro
< 1 MIN READ
Analyze Mold Flow in NX

Analyze Mold Flow in NX

May 29, 2013
Sam Kuan, Siemens PLM, demonstrates the new injection flow capabilities in NX 8.5. Capabilities include melt front time, air trap, weld line, pressure drop, melt front temperature, maximum temperatur...
By Danny Santoro
< 1 MIN READ
Feature-Based Machining in NX CAM

Feature-Based Machining in NX CAM

May 23, 2013
NX CAM can automate CNC programing by using Feature-Based Machining (FBM). The generative FBM technology automatically determines the machining process for a wide range of features. NX uses the Produ...
By Danny Santoro
< 1 MIN READ
3 to 5 Axis Toolpath Conversion

3 to 5 Axis Toolpath Conversion

May 16, 2013
With the 3 to 5 axis toolpath conversion capability in NX CAM you can easily machine molds and dies with deep cavities. NX analyzes the toolpath and it automatically tilts the tool to avoid holder co...
By Danny Santoro
< 1 MIN READ
Minco – Achieving Success with NX

Minco – Achieving Success with NX

May 8, 2013
Meet Minco Tool and Mold, a major plastic injection mold manufacturer in the United States. Minco uses NX Mold Design and NX CAM to capture a niche in the market for manufacturing complex shaped part...
By Danny Santoro
< 1 MIN READ
Next Level of CAD/CAM/CNC Process Integration

Next Level of CAD/CAM/CNC Process Integration

April 30, 2013
From full associativity between design and manufacturing departments to increased CNC programming and machining productivity, improved utilization of cutting tool catalogs and secure management of in...
By Danny Santoro
< 1 MIN READ