Product: Simcenter 3D

Filter by:

The journey continues with Simcenter 3D Electromagnetics

August 1, 2019

Over the last 25 years, electromagnetic engineering has become central in the development of electronic, electrical and electromechanical devices and ultimately revolutionized the way we work, travel…

By Chad Ghalamzan
3 MIN READ

Simcenter 3D Drop Test Demo

July 25, 2019

 
 
Everyone knows the feeling: You’re going about your day, like usual, and it happens… your hand slips leaving your phone in a free fall. You try to stop it from a direct collision …

By Steve_Cortelli
< 1 MIN READ

Dynamische Simulation von Schläuchen, Kabeln und Kabelbäumen

July 12, 2019

In zahlreichen Produkten sorgen Schläuche, Kabel und Kabelbäume für die Übertragung von Energie und Signalen und sind dabei dynamischen Belastungen ausgesetzt. Wenn diese die Anforderungen jedoch nic…

By TamaraEngel
< 1 MIN READ

Simcenter 3D 2019.2: What’s New?

July 9, 2019

Simcenter 3D 2019.2: Advancing the state of the art
Simcenter 3D has been at the forefront in advancing the state of the art for engineering simulation, and this latest release continues to build …

By Patrick Farrell
5 MIN READ

Simcenter 3D: Schnelle und flexible Simulation von Produktänderungen

July 8, 2019

Der frühzeitige Einsatz von Simulationen bereits in der Produktentwicklung kann Ihnen viele Vorteile bieten. Schließlich kann Ihre Entwicklung durch ein tieferes Verständnis zielgerichteter auslegt w…

By TamaraEngel
< 1 MIN READ

Developing a Novel Trailing-Edge Flap Mechanism with Simcenter 3D

June 27, 2019

The aviation industry is living its golden age with record passenger traffic and tremendous growth – air traffic is expected to be doubled in the next 15 to 20 years! However, this positive outlook c…

By Steve_Cortelli
5 MIN READ

More than EM – A Multi-Discipline Approach to Motor Design

June 27, 2019

I recently read a very interesting IEEE paper called Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices.  In the first few paragraphs, there was some stag…

By Chad Ghalamzan
2 MIN READ

Simulationen in der CAD-Umgebung: Frontloading in der Entwicklung

June 27, 2019

Der Trend, die Entwicklungskosten und -zeiten zu reduzieren und dabei gleichzeitig innovativere und besser funktionierende Produkte zu entwickeln, ist ungebrochen. Den dadurch entstehenden Anforderun…

By TamaraEngel
< 1 MIN READ

Perfecting transmissions need not be at evolution pace

June 25, 2019

Gears are undisputedly engineering marvels. Ever since their existence (some predict it as early as third century B.C.) gears were used in sophisticated transmissions  –  rotating mills, ir…

By Rajesh Ramaya Selvaraj
3 MIN READ