Customer Success Story

Kotchergenko use Femap to increase service offerings and gain a competitive edge

December 9, 2014

Kotchergenko was founded in 1993 to fill a technological gap that existed between machinery and structural design. The company has always differentiated itself from the competition through high quali…

By AlRobertson

< 1 MIN READ

Cometal uses Femap to cut costs and increase operational safety

November 18, 2014

The extrusion business is characterized by pricing sensitivity, which is where Femap helps Cometal achieve success by optimizing use of expensive materials and enabling maximum operating safety. Desi…

By AlRobertson

< 1 MIN READ

Astronomic Instruments Maker uses Femap to Save Time and Costs

September 9, 2014

ADS International, based in Valmadrera, Lecco, Italy, has been designing and building telescope, radio telescope and astronomic instruments for nearly 30 years. The company’s two main product lines a…

By AlRobertson

< 1 MIN READ

Dental implant maker opens new markets with Solid Edge and Femap

August 6, 2014

Biotec Srl, established in 1998 in Povolaro di Dueville near Vicenza in Italy, manufactures and sells advanced dental implants. The company performs research, innovation and clinical studies, managin…

By AlRobertson

2 MIN READ

RIT Achieves More Accurate Analysis Results with Femap

June 20, 2014

The Formula SAE® competition is a student design competition organized by SAE International (formerly Society of Automotive Engineers). Rochester Institute of Technology (RIT) has been a long-s…

By AlRobertson

2 MIN READ

JAXA uses Femap to reduce training costs and increase R&D efficiency

May 5, 2014

The Chofu Aerospace Center (CAC) Aerodrome Branch of the Japan Aerospace Exploration Agency (JAXA) develops advanced engineering technologies for future applications. The scale of research ranges acr…

By AlRobertson

2 MIN READ

See how NST use Femap to deliver high value to customers through simulation expertise

February 11, 2014

Numerical Simulation Tech Co. (NST) examines how structures perform under expected loads with the help of Femap. For more than 20 years NST’s specialist computer-aided engineering (CAE) engineers hav…

By AlRobertson

< 1 MIN READ

How American Axle & Manufacturing Integrates NX & LMS Test.Lab

November 15, 2013

Alexander Sandstrom from American Axle and Manufacturing presented at the 2013 NX CAE Symposium. His presentation covered the integration of NX & LMS and can be viewed/downloaded in t…

By SusanCinadr

< 1 MIN READ

PlySim automates composite FE modeling to reduce design time

August 7, 2013

PlySim is a composite structural engineering consultancy which focuses on finite element analysis. Its main markets are in the renewable energy sector (wind, wave and tidal) as well as marine and civ…

By AlRobertson

2 MIN READ