Computer Aided Manufacturing (CAM)

NX CAM Increases Overall Productivity by 40 Percent for Armo Tool Limited

March 2, 2015

Check out this Armo Tool and Siemens PLM Software success story, “CAM Software is the key to continuous improvement,” published in the March issue of Modern Machine Shop. The following is a brie…

By Stephanie Aldrete

2 MIN READ

NX 10 for Manufacturing Increases Shop Floor Efficiencies

January 7, 2015

In NX 10 for Manufacturing, we introduced more powerful capabilities for CAM, CMM, and tool design that can boost efficiency of shop floor equipment and increase overall productivity. The software al…

By Sashko Kurciski

2 MIN READ

Enter Contest – Win Prizes!

December 22, 2014

Announcing a new contest for our loyal NX for Manufacturing Forum participants!

‘Tis the season for giving, and we at the NX for Manufacturing Forum want to do some giving as well. We ha…

By DerekHart

< 1 MIN READ

NX CAM 10 provides more power for complex parts machining

November 11, 2014

New industry-specific capabilities in NX CAM 10 help you program faster and machine better quality parts. In this NX CAM 10 introduction article, we’ll take a look at some of the recent enha…

By DerekHart

3 MIN READ

Improve your cutting performance with NX CAM 10 for Die-Mold machining

November 6, 2014

New industry-specific capabilities in NX CAM 10 help you program faster and machine better quality parts. In this NX CAM 10 introduction article, we’ll see how roughing and finishing operati…

By DerekHart

3 MIN READ

NX CAM 10 offers a powerful solution for prismatic parts machining

November 3, 2014

New industry-specific capabilities in NX CAM 10 help you program faster and machine better quality parts. In this NX CAM 10 introduction article, we’ll take a look at some of the recent enha…

By DerekHart

3 MIN READ

Preparing for NX 10 at CAM Fest

October 29, 2014

As we approach the formal release of NX 10, the NX CAM team did what they have done for more than 15 years: host a week-long training event for our partners and Siemens PLM Software people to get cur…

By DerekHart

< 1 MIN READ

New NX CAM 9.0.2 Self-Demos available

September 3, 2014

NX CAM 9.0.2 self-demo describing smoothing corners in Flowcut Reference Tool operations

Bill Storrs has been posting brief demos of new functionality starting with NX 9.0.0. We…

By DerekHart

< 1 MIN READ

Another happy customer – FUNCOSA

July 28, 2014

FUNCOSA, a machinery and heavy equipment casting supplier, is featured in a new customer case study.
http://www.plm.automation.siemens.com/en_us/about_us/success/case_study.cfm?Component=227641&amp…

By DerekHart

< 1 MIN READ