Mold & Die

Filter by:

Next Generation Mold & Die Machining with NX CAM

October 30, 2017

Watch our video series describing exciting new capabilities in NX CAM 12.  The complete “Next Generation Mold & Die Machining with NX CAM” video transcript appears below the video link….

By Danny Santoro
2 MIN READ

Video: NX 11 for Manufacturing Overview

August 15, 2016

New manufacturing software technologies in NX 11 for Manufacturing can dramatically improve productivity and create new opportunities to transform your business. The robotics machining and groundbrea…

By Danny Santoro
< 1 MIN READ

Improve your cutting performance with NX CAM 10 for Die-Mold machining

November 6, 2014

New industry-specific capabilities in NX CAM 10 help you program faster and machine better quality parts. In this NX CAM 10 introduction article, we’ll see how roughing and finishing operati…

By DerekHart
3 MIN READ
How to create VoluMill roughing patterns with NX CAM

How to create VoluMill roughing patterns with NX CAM

March 12, 2014

 
Celeritive’s VoluMill pattern is a patented approach to high speed roughing that is well-suited to hard materials. See how easy it is to use the VoluMill plug-in for NX CAM and create these …

By DerekHart
< 1 MIN READ
How to smooth out high speed machine motion with NX CAM

How to smooth out high speed machine motion with NX CAM

March 12, 2014

 
Is your high speed machine suffering from fitful accel/decel as it process rapid traverse motions? If you isolate Z-travel as part of G0 rapid processing in order to “decend last” or “lift f…

By DerekHart
< 1 MIN READ

Introducing Die/Mold Machining Self-Demos for NX CAM 9

October 29, 2013

Introducing seven new self-demos designed to quickly bring you up to speed on what’s ne w for Die/Mold Machining in NX CAM 9. These enhancements improve efficiency, control, and quality of finish whe…

By NXManufacturing
3 MIN READ

Tilt Tool Axis

October 29, 2013

I showed in a previous blog post how to use Divide By Holder to keep the cutting tool as short as possible.  Today I want to show how to take advantage of multi-axis capability of NX CAM and CAM…

By wrightj
2 MIN READ

New Tech Tip describes new-for-NX CAM 9 Cut Region Management

October 15, 2013

Last week’s Tech Tip was the first in our series of new NX CAM 9 enhancement webinars. This Tech Tip describes some powerful new options for optimizing cut patterns across steep and non-steep regions…

By DerekHart
< 1 MIN READ

NX CAM 9 preview: Take precise control over die-mold machining strategies

October 2, 2013

 
Cut Region Management is one the many new capabilities in NX CAM 9 for die-mold machining. With Cut Region Management, you get precise control over area milling cut regions and machinin…

By Danny Santoro
< 1 MIN READ