Learning Resources

Filter by:
Image of Siemens eRod digital manufacturing technology demonstrator vehicle

EV component manufacturing – part 1

November 21, 2023

In this series, we look at a practical application of the digital machine shop in the efficient development of high performance, low weight component parts that will be used on our Siemens e-Rod technology demonstrator.

By Matthias Leinberger
4 MIN READ

The Digital Demo to Machining Better Parts

December 2, 2021

In a previous blog, we highlighted a recent article by Modern Machine Shop focused on how digital manufacturing powered by…

By Shannon Kruse
< 1 MIN READ
Grob CNC Machine Tool Adaptive Machining.

Closed-loop Adaptive Machining using NX CAM

October 29, 2021

A recent article by Modern Machine Shop takes a closer look into how digital manufacturing can help companies create higher…

By Shannon Kruse
2 MIN READ
Multi-axis deburring in NX CAM with real world examples

NX CAM’s Multi Axis Deburring

October 8, 2021

In the latest release of NX CAM (June 2021), a new operation subtype, Multi Axis Deburring, was introduced to help…

By Shannon Kruse
2 MIN READ

Getting Real: Shop Floor Connectivity

July 12, 2021

Welcome to the final post in our blog series on the Digital Machine Shop! My name is Corsin Buerer. I…

By Corsin Buerer
6 MIN READ

Making Sure We Got It Right: CMM Inspection Programming for the Quadcopter Mold

July 6, 2021

We’re nearing the completion of our tour through the Digital Machine Shop. My name is John Zhang, and I am…

By John Zhang
6 MIN READ

Getting Closer to Launch: Additive Manufacturing for the Quadcopter Mold

June 28, 2021

My name is Ashley Eckhoff, and I am a part of the Additive Manufacturing Group at Siemens Digital Industries Software….

By Ashley_Eckhoff
5 MIN READ

Moving into Metal: CNC Programming of the Quadcopter’s Molds

June 21, 2021

In this post, we’ll continue our tour through the Digital Machine Shop as the mold for the plastic top of…

By LarsOkkels
9 MIN READ

Mold Design: The Quadcopter Launch Begins

June 14, 2021

Welcome back to the Quadcopter blog series, where we’re using the injection molded cover of a quadcopter to illustrate the…

By Himanshu Iyer
7 MIN READ