Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Thought Leadership

Multi-disciplinary design – capturing and managing design disciplines (white paper)

November 03, 2020
In a recently published white paper, it addresses how complex machinery is not a new concept: mechanical machinery controls systems,...
By Bill Butcher
2 MIN READ

Simulating the Real World

How Cool is that? A 1D3D Approach to Simulating Liquid Cooling

November 03, 2020
The accuracy of 3D in a 1D Systems Simulation context. Breaking down barriers using 1D3D approaches.
By Robin Bornoff
3 MIN READ

Simcenter

The evolution of integrated occupant safety systems

November 03, 2020
Siemens continually demonstrate the power of using digital twins. In the automotive industry, digital solutions of occupant safety systems can...
By Paul van Straten
6 MIN READ

NX Design

NX Render Blog Series: The Visualization Process for Heavy Equipment – part three

November 03, 2020
Introduction We’re back with Part Three of the NX Render blog series, where we take you through the five stages of...
By Shannon McGinty
5 MIN READ

NX Manufacturing

Disrupt and Lead by Transforming Part Manufacturing

November 03, 2020
Being profitable in part manufacturing is never easy, and over the past few years has become even harder. Many companies...
By Okay Yaramanoglu
3 MIN READ

Siemens Software Podcast Network

Podcast: "What it Takes to Build a Supersonic Aircraft"

November 02, 2020
Can you believe we’re talking about supersonic flight again? It’s true. Fueled by the digital transformation, OEMs are energized to...
By Scott Salzwedel
20 MIN READ

Verification Horizons

Leveraging BIST to reduce silicon cost in ISO26262 compliant semiconductors

November 02, 2020
IC complexity for automotive applications continues to grow with experts estimating that automotive electronics will eventually exceed 50% of total...
By Jake Wiltgen
< 1 MIN READ

Verification Horizons

The UVM Config DB and Scope

November 02, 2020
Introduction With any large software project, you need to share information and control across widely separated blocks. In the bad...
By Chris Spear
3 MIN READ

Simcenter

Looking for a three-way catalyst reaction model development workflow?

November 02, 2020
Simulate vehicle emissions in real conditions requires the set-up of a catalyst model with proper reaction mechanism representation. But this...
By Sana Loussaief
4 MIN READ

Latest podcast episodes


Bugged Out

SDC verification as a first-class asset: A deep dive with Chandu Challapalli

January 27, 2026
Harry Foster talks with Chandu Challapalli, Senior Management Director at Siemens EDA, about why timing constraints must be treated as first-class verification assets.
By Julie Weber
< 1 MIN READ

AI Spectrum

Understanding AI-assisted Chip Design

January 23, 2026
Chip design is one of the most complex and challenging tasks in the world, requiring specialized tools and knowledge far...
By Spencer Acain
< 1 MIN READ

Engineering the Future Workforce

How Arizona State University is redefining education and lifelong learning through microcredentials

January 05, 2026
Stackable microcredentials are emerging as an essential tool for closing the talent gap at the speed of industrial change. 
By Ian Mark
3 MIN READ