Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Corporate Blog

Geometric Constraint Solving and Spin Surfaces

October 27, 2011
In amongst all of the publicity around PLM Connection Europe it would have been easy to miss the announcement of the latest release of the D-Cubed 3D products . As it happens, the timing was a coi...
By MikeAtkins
2 MIN READ

Corporate Blog

Element Visual Inspection – Femap Tips & Tricks

October 25, 2011
See how you can easily locate and visually inspect solid elements in Femap using the Meshing Toolbox Locator and visualization tools. Alastair
By AlRobertson
< 1 MIN READ

Corporate Blog

PLM Connection Europe Summarized and Storified

October 25, 2011
View "Siemens PLM Connection Europe Summary" on Storify
By Dora Smith
< 1 MIN READ

Corporate Blog

Marenco Clean Sheets a New Helicopter

October 24, 2011
Those that know me know I'm a bit partial to the Swiss given family connections there. So I was keen to hear the Marenco Swiss Helicopter presentation at last week's PLM Connection Europe event. CEO ...
By Dora Smith
< 1 MIN READ

Corporate Blog

Introduction to Local Motors - LM Series Part 1

October 24, 2011
You may have seen our press release on Siemens PLM and Local Motors teaming up today.  Being kind of a car guy who is interested in the new ways to add “social” to “product development”, I’ve be...
By MarkBurhop
2 MIN READ

Embedded Software

Dennis Ritchie and C for embedded

October 24, 2011
I was, of course, saddened to hear the recent news of the death of Steve Jobs. Since then, the Internet...
By Colin Walls
2 MIN READ

Embedded Software

How green is my aircraft?

October 20, 2011
As I have mentioned before, this is a busy time of year for me. A lot of my time is...
By Colin Walls
3 MIN READ

Simulating the Real World

All Detailed Thermal IC Package Models are Wrong... Probably

October 20, 2011
‘Rubbish In -> Rubbish Out’ is a well accepted fact in the world of simulation. Regardless of the technical capabilities...
By Robin Bornoff
3 MIN READ

Corporate Blog

NX 8 for CAM and Tooling

October 19, 2011
As I mentioned before, NX 8 contains over 400 customer focused projects across the entire product.  One of the areas that I'd like to highlight is CAM and Tooling (as we call it, Manufacturing)....
By JerrySarfati
< 1 MIN READ

Latest podcast episodes


The Industry Forward Podcast

The 5 best FAIR data secrets to empower process engineers

April 24, 2026
Learn the five secrets of FAIR data and how it will herald the next industrial revolution through digital twins, AI and simulation.
By Shawn Wasserman
< 1 MIN READ

The Industry Forward Podcast

Shifting left: How Makersite and Siemens enable sustainability by design

April 17, 2026
The concept of “shifting left” is especially critical for the development of sustainable products. The sooner companies have insights into...
By Quinn Foster
< 1 MIN READ

The Industry Forward Podcast

How data is the new oil

April 10, 2026
Learn why data is the new oil, how to mine insights from data lakes and the future of multidisciplinary AI for engineering applications.
By Shawn Wasserman
< 1 MIN READ