Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs

Medical Device Design Control (Part 2 of 3)

Medical device product development work is a highly integrated, and regulated process. Implementation of a requirements tracking solution requires attention to a variety of nuanced topics. In this 3-...

By laurencesampson

Designcenter Solid Edge

Interview with Mike Evans, CEO of Greenpower USA

Mike Evans is a Huntsville, Alabama educator who has been teaching for 25 years and using Solid Edge in his Design Drafting classes for about 15 of those years. He became involved with Siemens PLM di...

Verification Horizons

Part 3: The 2014 Wilson Research Group Functional Verification Study

FPGA Effort Verification Trends (Continued) This blog is a continuation of a series of blogs related to the 2014 Wilson...

By Harry Foster

Construction of Solar Impulse 2

Solar Impulse video showing what it took to build the solar powered aircraft. https://www.youtube.com/watch?v=oNMBPJpaimc Keep an eye out for the Femap screens in the background in some ...

Simulating the Real World

Organically Grown 3D Printable Heatsinks – Part 3: Smoothing the Edges

The shape of the small piece of geometry that is added so as to successively ‘relieve’ the design determines the...

By Robin Bornoff

Designcenter Solid Edge

Color in Drawings

2D drawings have been dead for 30 years, if you believed CAD salesmen in the 1980s. Most of us knew that was wrong back then. Even today, there are only a few areas where drawings are truly extinct. ...

Simulation Solutions for Today, Tomorrow, the Future

Simulation solutions aren't limited to CAE experts anymore. Gone are the days when their use was cut off from the rest of the product development team. Those days have given way t...

Electronic Systems Design

Behind the Design: Fujitsu Technology Solutions GmbH

This is the sixth post in a series showcasing the winners of the 2014 Technology Leadership Awards. View the previous...

Calibre IC Design & Manufacturing

Designing and Testing FinFet-based IC Designs

By Carey Robertson and Steve Pateras, Mentor Graphics Are your processes ready for finFETs?

By Calibre IC Design & Manufacturing

Latest podcast episodes

Zero trust in silicon: The new security imperative for chiplet-based 3D ICs

“You don’t just say, the other chiplet that’s on this die, I’m going to trust it, it’s fine. No —...

Printed Circuit Podcast

Communication, trust, process: The three pillars every co-design team must get right

“If you started back in the light table taping days and you decided that when the first CAD tools came...

The Industry Forward Podcast

Bottom line, people can't ditch oil. Is going green doomed?

Experts say Industry can not fully abandon Petroleum. So, is the concept of industry "going green" even possible?

By Shawn Wasserman