Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Calibre IC Design & Manufacturing

A Look Behind the Mask of Multi-Patterning

January 28, 2015
By Michael White, Mentor Graphics An overview to the mystery of Multi-Patterning
By Calibre IC Design & Manufacturing
9 MIN READ

Calibre IC Design & Manufacturing

My Design's Interconnect Has Enough Wire Width to Withstand ESD... Doesn't It?

January 28, 2015
By Frank Feng, Mentor Graphics Electrostatic discharge can destroy a circuit, but designing adequate protection is not always a matter...
By Calibre IC Design & Manufacturing
5 MIN READ

Solid Edge

Interview with Jeff Walker, Director of Solid Edge Products

January 28, 2015
J eff Walker is the Director of Solid Edge Products. He's heavily involved in the development prcoess, and one of the guys who really knows the software inside out because he's been involved in sp...
By MLombard
4 MIN READ

Calibre IC Design & Manufacturing

Self-Aligned Double Patterning, Part One

January 27, 2015
By David Abercrombie, Mentor Graphics A walk-through of the SADP process for success.    
By Calibre IC Design & Manufacturing
6 MIN READ

Calibre IC Design & Manufacturing

Are multi-patterning corners for parasitic extraction really necessary for 16/14 nm?

January 27, 2015
By Karen Chow, Mentor Graphics How does multi-patterning impact parasitic extraction? How many corners do you really need?  
By Calibre IC Design & Manufacturing
5 MIN READ

Calibre IC Design & Manufacturing

How to Survive the Perfect Storm of Changing Fill Requirements

January 27, 2015
By Jeff Wilson, Mentor Graphics Using hierarchy in the fill process provides greater control for the designers, improves consistency throughout...
By Calibre IC Design & Manufacturing
5 MIN READ

Polarion

Accelerate Automotive Innovation to Top Speed (Part 3 of 6)

January 27, 2015
Innovation has become an exercise of advancing embedded systems to stay ahead in the highly competitive automotive industry. While opening up great new opportunities, integration of software into mec...
By Editor3
4 MIN READ

Teamcenter

Product Variant Management: Delivering the Variability Your Customers Demand

January 27, 2015
PLM is typically the gold source for the engineering definition of a product
By amystrucko
4 MIN READ

Solid Edge

Dan Staples Interview on Connect Press Gives Predictions for 2015

January 27, 2015
Interested in what's in store for the CAD industry in 2015? Dan Staples talked to Connect Press recently and gave some predictions for what he thinks is going to happen. This link is worth a rea...
By MLombard
< 1 MIN READ

Latest podcast episodes


Engineering the Future Workforce

How Arizona State University is redefining education and lifelong learning through microcredentials

January 05, 2026
Stackable microcredentials are emerging as an essential tool for closing the talent gap at the speed of industrial change. 
By Ian Mark
3 MIN READ

AI Spectrum

Driving the adoption of generative AI in industry

January 02, 2026
New technology can offer a lot of promise for improving on long-standing techniques or developing innovative approaches to different challenges...
By Spencer Acain
< 1 MIN READ

The Industry Forward Podcast with Dale Tutt

Ep 31 - The Shift-Left in Supply Chain with Richard Barnett - Part 3

January 02, 2026
Welcome to the Industry Forward Podcast with Dale Tutt, the show where we examine industry and technology trends with the...
By Conor Peick
< 1 MIN READ