Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Tecnomatix

RobotExpert Webinar - RobotExpert Programming/OLPs

This is the part 3 of RobotExpert webinar course provided by our partner Geometric Solutions. In the on-demand webinar you will learn about how to modify robotic operations, use the teach pendants an...

Solid Edge

Bill McClure and Dan Staples in New Positions

Mainstream Engineering, which includes Solid Edge, Femap, and CAM Express, has seen a shuffle at the top. Bill McClure has been the leader of this segment, but is now moving on to VP of Special Proje...

Corporate Blog

Increase profitability by taking control of procurement costs

When procuring a part, it is important for procurement officers to understand the supplier's costs, their material costs, manufacturing costs, machine rates, labor and burden costs, etc. Th...

NX Manufacturing

New Tech Tips describe NX CAM 9 updates in Turning and Holemaking

Two new Tech Tips have been posted to the Tech Tip knowledge base. Both of these are distilled from Tom Van't Erve's webinar session last week. Tom presented the updates for both Turning and Holemaki...

NX Manufacturing

Introducing Die/Mold Machining Self-Demos for NX CAM 9

Introducing seven new self-demos designed to quickly bring you up to speed on what’s ne w for Die/Mold Machining in NX CAM 9. These enhancements improve efficiency, control, and quality of finish whe...

Simcenter

Femap 11.1 Preview – FE Modeling Enhancements

Let’s take a look at some of the finite element modeling enhancements that will be coming in the next version of Femap – 11.1 due to be released very soon.     We’ll have some mo...

Simcenter

Thanksgiving turkey analysis in Simcenter FLOEFD

For a festive thanksgiving blog, read on! Travis uses Simcenter FLOEFD to work out the best way of roasting your thanksgiving turkey!

NX Manufacturing

Tilt Tool Axis

I showed in a previous blog post how to use Divide By Holder to keep the cutting tool as short as possible.  Today I want to show how to take advantage of multi-axis capability of NX CAM and CAM...

Polarion

Let's talk software testing - on LinkedIn

Polarion has gone social with the introduction of our new open group on LinkedIn: Software Test Case Management.  We have created this forum for anything about software testing.Feel ...