Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs

Designcenter Solid Edge

What’s New in Solid Edge 2020: Additive Manufacturing

July 09, 2019
It's finally here. Solid Edge 2020 offers advanced additive manufacturing processes and tools to ensure 3D printed parts are created right the first time. Features from print bed orientation to physi...
By anthonybele
< 1 MIN READ
Simcenter

Simcenter 3D 2019.2: What's New?

July 09, 2019
Simcenter 3D 2019.2: Advancing the state of the art Simcenter 3D has been at the forefront in advancing the state of the art for engineering simulation, and this latest release continues to build ...
By Patrick Farrell
5 MIN READ
Simcenter

Circuit breakers, thunders and the challenges of multiphysics

July 09, 2019
I suspect nobody of us is eager to be hit by a lightning strike. The experience would be - in the best case - very painful. Lightning is a violent electrical discharge that turns the gas into a hot, ...
By Angelo Limone
5 MIN READ
Embedded Software

Embedded software article: RTOS Revealed #33

July 08, 2019
My latest article on embedded.com has been published. This piece is the thirty-third installment of the RTOS Revealed series, which...
By Colin Walls
2 MIN READ
Teamcenter

What’s new in Teamcenter Product Cost Management?

July 08, 2019
Continuous innovation is a key component of our strategy for Teamcenter Product Cost Management. Uncover the new capabilities and improvements introduced in the version 8.5 and stay up-to-date with b...
By Emilia Maier
2 MIN READ
Simcenter

Siemens partnering with PRODERA for complete GVT and modal testing solution

July 08, 2019
Siemens Industry Software recently signed an OEM agreement with PRODERA, a renowned provider of sensors, shakers and suspension systems tailored to aircraft ground vibration testing (GVT) application...
By Raphael Hallez
3 MIN READ
Designcenter

Webinar: Next Generation Design for Heavy Equipment

July 08, 2019
Register now for our webinar on the next generation of design for the heavy equipment industry. Here's what you can expect:  Heavy equipment manufacturers face new challenges every d...
By William Chanatry
< 1 MIN READ
Simcenter

Better electronics design just got even faster.

July 08, 2019
Modern electronics design has never been so complex. Learn how the new BCI-ROM Functionality in Simcenter Flotherm V2019.1 can help improve your designs faster.
By Jane Wade
< 1 MIN READ
Simcenter

Simcenter 3D: Schnelle und flexible Simulation von Produktänderungen

July 08, 2019
Der frühzeitige Einsatz von Simulationen bereits in der Produktentwicklung kann Ihnen viele Vorteile bieten. Schließlich kann Ihre Entwicklung durch ein tieferes Verständnis zielgerichteter auslegt w...
By TamaraEngel
< 1 MIN READ

Latest podcast episodes

The Industry Forward Podcast

How to make healthcare systems that rival science fiction

October 16, 2026
Uncover the pillars needed to bring future healthcare systems to the present.
By Shawn Wasserman
2 MIN READ
Printed Circuit Podcast

Dear designer: A wish list from the factory floor

October 14, 2026
What if the fabricator could write a letter to every PCB designer — and the first line was “please call...
By Tova Levy
26 MIN READ
The Industry Forward Podcast

How to secure Life Sciences without hindering user experiences

October 09, 2026
Secure Life Sciences technologies must be balanced. If they are too hard to use, patients and doctors will reject them.
By Shawn Wasserman
2 MIN READ
View our podcasts