NX Render

Filter by:

NX for Students | Enhancing Future Employability and Getting NX Certified

March 15, 2023

As a student engineer or designer, we are filled with creative ideas. Learning NX as a tool for all stages of your design process can help you bring these ideas to life, during university, and beyond with a single software.

By eilidh.dickerson
5 MIN READ
nx vr

NX Render Talks Marine Industry | Part Five: NX VR for Design Review

May 16, 2022

Since the pandemic, we can all relate to the importance of collaborating with your team remotely and effectively. With NX…

By Shannon McGinty
< 1 MIN READ
nx vr

NX Render Blog Series for the Marine Industry | Part Five: NX VR for Design Review

April 14, 2022

Introduction We’re at the end of our NX Render talks series for the marine industry! And with that, we’re bringing…

By Shannon McGinty
4 MIN READ
nx

NX Render Talks Marine Industry | Part Four: Exterior Environment Customization

March 24, 2022

Part four of our NX Render Talks series is here, and this time we’re together, in person for the interview!…

By Shannon McGinty
< 1 MIN READ
nx marine

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Four

February 17, 2022

Introduction It’s been a while since our last instalment of the NX Render series for the marine industry, but here…

By Shannon McGinty
6 MIN READ
Render Setup text with two headshots

Render Setup | NX Render Talk Series for Consumer Products | Part Five

February 4, 2022

Welcome back to the fifth and final instalment of the NX Render Talks series for Consumer Products. We’ll be taking…

By Jamie Tyler
< 1 MIN READ
NX Render

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Three

December 2, 2021

Introduction For anyone who isn’t an expert in rendering, creating an environment like one that the Princess Yacht X95 is…

By Shannon McGinty
6 MIN READ
Thumbnails and additional text

Cameras | NX Render Talks Series for Consumer Products | Part Four

November 25, 2021

We’re back with the fourth instalment of the NX Render Talks for Consumer Products series. As always, we will be…

By Jamie Tyler
< 1 MIN READ
appearance management

NX Render Talks Marine Industry | Part Two: Materials and Appearance Management

November 4, 2021

Part Two of our Render Talks for Marine is now live! The second talk is once again joined by Shannon McGinty,…

By Shannon McGinty
< 1 MIN READ