NX Hints and Tips – view a model from inside the model

We all know how to zoom, pan and rotate around models.But what if you want to view a model from inside the model?



You can use this methodto show a correct perspective view from inside a vehicle, a building, or a ship.

This technique uses two NX functions – creating a camera and setting the center of rotation.


Remember that the camera location and perspective are stored with the camera definition, but not the Rotate Point.

Jerry

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/news/nx-hints-and-tips-view-a-model-from-inside-the-model/