Burhop Mark

Helping to bring the best technologies to Solid Edge and Femap users

Solid Edge Developer Day Coming May 12!

Solid Edge Developer Day Coming May 12!

January 10, 2014
I just wanted to let you all know we are again planning aSolid Edge Developer day for 2014 .  This has been one of the highest rated sessions forSolid Edge Universityand we ...
By burhop
< 1 MIN READ
Using STL to 3D Print in Solid Edge

Using STL to 3D Print in Solid Edge

October 9, 2013
Those of you that follow me on twitter or Google + likely know I have a few home projects running around 3D printing.  Many of you have high end Stratasys or 3D Systems machi...
By burhop
< 1 MIN READ
Geometric DFX now supporting Solid Edge

Geometric DFX now supporting Solid Edge

September 16, 2013
I had an interesting demo from the Geometric DFX folks.  I did a post on the Siemens PLM corporate blog  that gives a high level view but thought I’d share some of the details here. ...
By burhop
< 1 MIN READ
Handy Tool for Off-The-Shelf Parts in Your Design

Handy Tool for Off-The-Shelf Parts in Your Design

August 14, 2013
Back in m y day (as my kids have started calling anything that predates them), finding motors, connectors, pumps,  springs or any other part I might buy off the shelf to use in my design was a ...
By burhop
< 1 MIN READ