Webinars of the month – June 2016

Highlight

Balance productivity and energy-efficiency of industrial machinery
On-demand webinar
Growing social awareness of energy issues, increased electricity prices and fierce international competition force machinery manufacturers to deliver energy-efficient and high-performance products. The model-based systems engineering (MBSE) approach becomes critical to design machines with maximum throughput and accuracy, as well as minimum down-time and operational costs. In the context of increased system interconnection and controls expansion, MBSE enables you to optimize all the mechanical aspects, electronics and software in a unique, integrated environment, rather than working on each area separately. 


industrial-machinery-200x150.jpgIn this on-demand webinar you will learn:



  • Balance machines’ performance and energy-consumption by predicting the multidisciplinary behavior of intelligent systems

  • Reduce fluid-borne and structure-borne noise induced by pressure and flow rate fluctuations in hydraulic systems and components

  • Model hydraulic, pneumatic or electrical actuation systems and define their impact on mechanical structures

  • Develop controls earlier and obtain more mature control strategies when entering the test phase


Watch the on-demand webinar

Live webinars


Introduction to durability
June 1, 11:00 a.m. EST 


  In this webinar you will learn: Durability_200x150.jpg



  • What is fatigue;

  • How to interpret typical fatigue-related curves;

  • Common approaches for fatigue estimation.


  



Register to the webinar

Designing energy-efficient home appliances faster with system simulation
June 2, 5, 11:00 a.m. EST


In this webinar you will learn:home_appliance200x150.jpg



  • How to virtually test the energetic performance of smart systems early in the design cycle;

  • How to detect possible maintenance issues and avoid costly products recalls;

  • How to drastically reduce the number of physical prototypes needed to get to the right design;


 Register to the webinar


  


Optimize engine cooling systems with model-based systems engineering
June 8, 11:00 a.m. EST 


Cooling_system_200x150.jpgIn this webinar you will learn:



  • How to support the design of engine cooling systems and the integration of additional heating strategies,

  • How to assess the impact of front-end module design on cooling system performance, and

  • How to evaluate the performance of new architecture and test control strategies


 Register to the webinar

Sound encapsulation solution for noise and vibration issues
June 22, 11:00 a.m. EST


accoustic2.jpgIn this webinar you will learn:



  • How to efficiently design sound enclosures for noise control

  • Is there a possibility to accommodate sound sources from measurement, flow based and mechanical vibrations?

  • Are there special techniques available to cover the full frequency range of interest?

  • What are the recent trends in enclosure acoustics simulation?


Register to the webinar

Electric motor noise modeling
June 29, 11:00 a.m. EST


electric motor noise modeling 200 x 150.jpgIn this webinar you will learn:



  • What are the noise sources in electric motors

  • How to model the noise sources and noise propagation paths

  • How to analyze sound pressure level

  • Mitigation strategies to reduce noise levels

 Register to the webinar

Want to stay up to date on news from Siemens Digital Industries Software? Click here to choose content that's right for you
This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/simcenter/webinars-of-the-month-june-2016/