Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Calibre IC Design & Manufacturing

My Design's Interconnect Has Enough Wire Width to Withstand ESD... Doesn't It?

January 28, 2015
By Frank Feng, Mentor Graphics Electrostatic discharge can destroy a circuit, but designing adequate protection is not always a matter...
By Calibre IC Design & Manufacturing
5 MIN READ

Designcenter Solid Edge

Interview with Jeff Walker, Director of Solid Edge Products

January 28, 2015
J eff Walker is the Director of Solid Edge Products. He's heavily involved in the development prcoess, and one of the guys who really knows the software inside out because he's been involved in sp...
By MLombard
4 MIN READ

Calibre IC Design & Manufacturing

Self-Aligned Double Patterning, Part One

January 27, 2015
By David Abercrombie, Mentor Graphics A walk-through of the SADP process for success.    
By Calibre IC Design & Manufacturing
6 MIN READ

Calibre IC Design & Manufacturing

Are multi-patterning corners for parasitic extraction really necessary for 16/14 nm?

January 27, 2015
By Karen Chow, Mentor Graphics How does multi-patterning impact parasitic extraction? How many corners do you really need?  
By Calibre IC Design & Manufacturing
5 MIN READ

Calibre IC Design & Manufacturing

How to Survive the Perfect Storm of Changing Fill Requirements

January 27, 2015
By Jeff Wilson, Mentor Graphics Using hierarchy in the fill process provides greater control for the designers, improves consistency throughout...
By Calibre IC Design & Manufacturing
5 MIN READ

Polarion

Accelerate Automotive Innovation to Top Speed (Part 3 of 6)

January 27, 2015
Innovation has become an exercise of advancing embedded systems to stay ahead in the highly competitive automotive industry. While opening up great new opportunities, integration of software into mec...
By Editor3
4 MIN READ

Teamcenter

Product Variant Management: Delivering the Variability Your Customers Demand

January 27, 2015
PLM is typically the gold source for the engineering definition of a product
By amystrucko
4 MIN READ

Designcenter Solid Edge

Dan Staples Interview on Connect Press Gives Predictions for 2015

January 27, 2015
Interested in what's in store for the CAD industry in 2015? Dan Staples talked to Connect Press recently and gave some predictions for what he thinks is going to happen. This link is worth a rea...
By MLombard
< 1 MIN READ

Designcenter

Touch Screen CAD: The Future is Now

January 27, 2015
Touch screen CAD gives you the power of 3D design with the simplicity and freedom of a mobile device. NX 10 offers an enhanced touch-enabled environment, so you can now design on the go with a M...
By Amy Reyes
< 1 MIN READ

Latest podcast episodes


3D IC

Zero trust in silicon: The new security imperative for chiplet-based 3D ICs

July 01, 2026
“You don’t just say, the other chiplet that’s on this die, I’m going to trust it, it’s fine. No —...
By Tova Levy
2 MIN READ

Printed Circuit Podcast

Communication, trust, process: The three pillars every co-design team must get right

June 30, 2026
“If you started back in the light table taping days and you decided that when the first CAD tools came...
By Tova Levy
2 MIN READ

The Industry Forward Podcast

Bottom line, people can't ditch oil. Is going green doomed?

June 26, 2026
Experts say Industry can not fully abandon Petroleum. So, is the concept of industry "going green" even possible?
By Shawn Wasserman
< 1 MIN READ