Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Design with Calibre

Are multi-patterning corners for parasitic extraction really necessary for 16/14 nm?

January 27, 2015
By Karen Chow, Mentor Graphics How does multi-patterning impact parasitic extraction? How many corners do you really need?  
By Design With Calibre
5 MIN READ

Design with Calibre

How to Survive the Perfect Storm of Changing Fill Requirements

January 27, 2015
By Jeff Wilson, Mentor Graphics Using hierarchy in the fill process provides greater control for the designers, improves consistency throughout...
By Design With Calibre
5 MIN READ

Polarion

Accelerate Automotive Innovation to Top Speed (Part 3 of 6)

January 27, 2015
Innovation has become an exercise of advancing embedded systems to stay ahead in the highly competitive automotive industry. While opening up great new opportunities, integration of software into mec...
By Editor3
4 MIN READ

Teamcenter

Product Variant Management: Delivering the Variability Your Customers Demand

January 27, 2015
PLM is typically the gold source for the engineering definition of a product
By amystrucko
4 MIN READ

Solid Edge

Dan Staples Interview on Connect Press Gives Predictions for 2015

January 27, 2015
Interested in what's in store for the CAD industry in 2015? Dan Staples talked to Connect Press recently and gave some predictions for what he thinks is going to happen. This link is worth a rea...
By MLombard
< 1 MIN READ

NX Design

Touch Screen CAD: The Future is Now

January 27, 2015
Touch screen CAD gives you the power of 3D design with the simplicity and freedom of a mobile device. NX 10 offers an enhanced touch-enabled environment, so you can now design on the go with a M...
By Amy Reyes
< 1 MIN READ

Simcenter

5 Tips to Make NX Nastran Faster

January 27, 2015
NX Nastran can be optimized to run simulations faster, but how? If you think processor speed is the main factor you should consider, think again. Degrees of freedom (DOF) are also not as important to...
By Amy Reyes
3 MIN READ

Electronic Systems Design

Behind the Design: Sanmina Corporation

January 26, 2015
This is the third post in a series showcasing the winners of the 2014 Technology Leadership Awards. View the previous...
By vernwnek
2 MIN READ

Embedded Software

More embedded articles: shared code, low level device access, selecting an OS, and using non-volatile memory

January 26, 2015
I have almost completed the job of cataloging my articles that have been published at embedded.com Here are another four,...
By Colin Walls
2 MIN READ

Latest podcast episodes


The Industry Forward Podcast with Dale Tutt

Ep 9 - The Energy Transition with John Nixon Part 1

December 20, 2024
The Industry Forward Podcast returns with a new discussion on the future of the energy industry as it grapples with...
By Conor Peick
< 1 MIN READ

Next Generation Design Podcast

Driving Innovation with SaaS: NX X for Product Design

December 17, 2024
SaaS is here to stay! Since 2017, the SaaS (Software as a Service) industry has expanded by more than 500%,...
By Mollie Gladden
15 MIN READ

AI Spectrum

How AI is optimizing the IC test process – Part 2

December 13, 2024
Microchips are getting smaller, denser and more complex with each passing year not only incurring increased costs, but greater manufacturing...
By Spencer Acain
< 1 MIN READ