Learn more about Feature Based Machining with Chad Varney

Feature Based Machining - Lunch Bytes Ally PLM


In this session of Chad Varney from Ally PLM we will take a general look at using Feature Based Machining in NX CAM.We will look at some more specific topics when using Feature Based Machining such as PMI, Tagging Features, and Features on Cylindrical Faces. Register here.

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-manufacturing/learn-more-about-feature-based-machining-with-chad-varney/