Corporate Blog

Filter by:

Featured posts

The future of manufacturing is here: How Siemens and Accenture are bringing the Industrial Metaverse to life

January 5, 2026

These days, it seems AI is at the center of the conversation in both our professional and private lives. And…

By Scott Salzwedel
6 MIN READ
Siemens receives the 2024 Tech Cares Award from TrustRadius

Siemens wins the 2024 Tech Cares Award from TrustRadius

August 19, 2024

For the third consecutive year, Siemens has been awarded the Tech Cares Award from software peer review platform TrustRadius in…

By Jasmin Welter
3 MIN READ
Siemens receives the 2023 Tech Cares Award from TrustRadius

Siemens receives the 2023 Tech Cares Award from TrustRadius

August 23, 2023

For the second consecutive year, Siemens has been recognized with the Tech Cares Award from TrustRadius, a software peer review…

By Brooke Heerdegen
3 MIN READ

Latest posts

Pharma-Bio Simulation

Pharma-Bio Simulation

March 3, 2009

  I’m no CAE analyst – although I could play one on TV – but with a father in refrigeration, I’ve always been interested in the intricacies of heat flow and transfer. Many of today’s im…

By Dora Smith
2 MIN READ
NX Synchronous CAE;  Part 2

NX Synchronous CAE;  Part 2

February 26, 2009

In Part 1 of my NX Synchronous CAE post,  I touched on how an analyst can make simple changes to non-NX design geometry to prepare the model for analysis. In this post I want to share how you ca…

By JerrySarfati
< 1 MIN READ
Synchronous Technology in History-Based Models

Synchronous Technology in History-Based Models

February 24, 2009

While there has been quite a bit of discussion recently about our synchronous technology in the history-free modeling mode,  I’d like to share how it can also be used in the history-based modeli…

By JerrySarfati
< 1 MIN READ
Traditional Versus Synchronous

Traditional Versus Synchronous

February 15, 2009

There continues to be a lot of discussion on merits of history free (Synchronous technology for Siemens PLM products) versus traditional history based modeling. There are many points at which you can…

By MarkBurhop
2 MIN READ
NX Synchronous CAE

NX Synchronous CAE

February 12, 2009

Synchronous Technology has been talked about intensively in the design community.  But did you know that it also impacts other areas – such as CAE? NX’s Design Freedom powered by Synchronous …

By JerrySarfati
< 1 MIN READ
Stimulation

Stimulation

February 11, 2009

You would have to be living under a rock to not know what the US Congress is working on this week on Capitol Hill. The Economic Stimulus Bill (warning: PDF link) has almost entirely consumed the nat…

By Christian Kelley
3 MIN READ
Siemens-UGS Merger: One Year Later

Siemens-UGS Merger: One Year Later

February 11, 2009

Managing Automation magazine recently wrote an in-depth article analyzing the progress of the former UGS organization since its acquisition by Siemens and subsequent renaming to Siemens PLM Software….

By Christian Kelley
< 1 MIN READ
Heard about Digital Manufacturing?

Heard about Digital Manufacturing?

February 5, 2009

You might say, I know how to design a product, but digital manufacturing? Is it something like the creation of a product out of pure energy; a kind of STAR TREK technology? That would be really cool,…

By Markus Erlmann
< 1 MIN READ
Black Diamond – The director’s cut   (Repost)

Black Diamond – The director’s cut   (Repost)

January 29, 2009

Are you a climber or skier? Even if you’re not, you’ll probably want to be once you see how NX user Black Diamond designs their products. Check out the main 8-minute video case study as well as a PD…

By JerrySarfati
< 1 MIN READ