Products

How Process Simulate Robotics enables realistic simulation and validation of various industrial cable dresspacks

By Stephanie Aldrete

The following set of videos shows the creation of flexible cables with various types of attachments in Tecnomatix Process Simulate Robotics software.

Rotating attachments, Retract System Type 2 and Type 3 are the latest additions enabling realistic simulation and validation of various industrial cable dresspacks.

Cable Dresspack Simulation Cantilever Solution Demonstration 

Cable Dresspack Simulation Retract System Type 2 Demonstration 

Cable Dresspack Simulation Retract System Type 3

Watch more videos from our Process Simulate video series

Videos:  New features & enhancements in Tecnomatix Process Simulate

This video series demonstrates the recently developed robot programming, event-based simulation and virtual commissioning features and enhancements in Tecnomatix Process Simulate, including automated rule-based signal mapping, skid conveyers simulation, part detection sensors, and direct connection to universal robots and others.

Video series: Plan, optimize and validate robotic paint programs

The following set of videos shows how to plan, optimize and validate robotic paint programs in Tecnomatix Process Simulate, starting from defining the coverage patterns, up to the thickness validation of the paint coat layers.

Let us know what you think of the Process Simulate video demo series in the comment section below.

Comments

One thought about “How Process Simulate Robotics enables realistic simulation and validation of various industrial cable dresspacks

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/tecnomatix/videos-process-simulate-robotics-enables-realistic-simulation-and-validation-of-various-industrial-cable-dresspacks/