Products

Solid Edge Community Open Source Initiative

August 31, 2014 • < 1 MIN READ
The following video is the official introduction to the Solid Edge Community Open Source Initiative. I spoke about this topic at Solid Edge University 2014. At that time, we were not quite ready...
By jnewell

The following video is the official introduction to the Solid Edge Community Open Source Initiative. I spoke about this topic at Solid Edge University 2014. At that time, we were not quite ready to go live as we were still learning how to set everything up and a lot was in flux. As of today, I’m happy to announce that we’re ready to move forward and share all of the hard work that has gone on in the project.

The video is 23 minutes long but I strongly encourage you all to watch it in its entirety as there is a lot of good information in it. I also attached the PowerPoint presentation.

Here are all of the relevant links:

Jason Newell

Jason is a Solutions Architect for Charles Machine Works in Perry, Oklahoma. As a 21 year IT veteran, Jason is well versed in a broad range of software technologies and programming languages. In 2005, Jason started JasonNewell.NET, a website dedicated to expanding the Solid Edge developer community and offering consulting services. Through his website, he was able to acquire Siemens PLM Solution Partner status and soon began consulting for Siemens PLM directly. Through his consulting efforts with Siemens PLM, Jason takes a leading role in expanding the developer community by contributing to the Solid Edge SDK, authoring open source projects and speaking at conferences.

More from this author

What to read next:

Comments

5 thoughts about “Solid Edge Community Open Source Initiative”

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/solidedge/solid-edge-community-open-source-initiative/