Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs

Embedded Software

ECS & IP-SoC

November 04, 2013
    As I mentioned previously, I am in the midst of a busy time for conferences. This week, I...
By Colin Walls
2 MIN READ
Designcenter

Can you do product design without touching your keyboard and mouse?

November 04, 2013
Here is a follow-up video showing a Touchless interface to NX with a Leap motion controller. The movie is available on the Siemens PLM Blog. Jerry
By JerrySarfati
< 1 MIN READ
NX Manufacturing

Shop Docs Customization Tutorial and Q&A for NX CAM 9

November 04, 2013
  Want to learn about the updates to Shop Docs in NX CAM 9? If so, you may find these new Tech Tips helpful: NX 9 Shop Docs Common Questions and Answers ...
By NXManufacturing
< 1 MIN READ
Designcenter Solid Edge

Opposite-Handed Parts and Drawings

November 04, 2013
For this blog article, I admit, I’ve borrowed an idea from Dan Staples. About 6 months ago, a user was asking a question on the forum about how to make a mirrored part and a mirrored draft from the o...
By MLombard
6 MIN READ
Tecnomatix

Zvi Feuer sharing his vision of "Future Factories" and how they will become engine for job creation

November 03, 2013
This is the first video of a new monthly video series. In each video, Zvi Feuer, General Manager of Tecnomatix at Siemens PLM Software, will talk about some of the exciting solutions offered by Tecno...
By anatyman
< 1 MIN READ
Polarion

Polarion 2014 EAP: First Reactions to Native Clustering

November 01, 2013
In the few days since we launched "Chapter 2" of the Polarion 2014 Early Access Program (EAP), we've had some super input on the new native clustering feature. It's extremely helpful to have this dir...
By walekJ
2 MIN READ
Embedded Software

ARM Tech Con in Sixteen Hours: Top Five Moments

November 01, 2013
Editor’s note: From time to time, I have guest bloggers. Findley Merritt is a social media specialist with Mentor Graphics...
By Colin Walls
2 MIN READ
NX Manufacturing

HAT GIVEAWAY – 30 days left to enter!

November 01, 2013
ENTEROURHAT GIVEAWAY Visit our NX Manufacturing Forum for a chance to win. We’re looking forward to reading your comments about NX CAM 9. - Here’s how ...
By Aaron Frankel
< 1 MIN READ
Designcenter Solid Edge

Making a Block Suitable for Schematics

November 01, 2013
Solid Edge installs with a lot of blocks that you can use for annotations and schematics, but the need may come up where you need something that isn’t supplied.  You have to make your own. It is...
By MLombard
4 MIN READ

Latest podcast episodes

The Industry Forward Podcast

How to secure Life Sciences without hindering user experiences

October 09, 2026
Secure Life Sciences technologies must be balanced. If they are too hard to use, patients and doctors will reject them.
By Shawn Wasserman
2 MIN READ
The Industry Forward Podcast

What it takes to power a humanoid robot

October 02, 2026
To read to this episode, click here. Batteries will play a critical role in the future of energy. Already, battery...
By Bianca Ward
< 1 MIN READ
The Industry Forward Podcast

The promising future of AI tech in Life Sciences

October 02, 2026
The promise of AI tech in Life Sciences can only come true if vast sums of data are digital twin ready.
By Shawn Wasserman
2 MIN READ
View our podcasts