Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Electronic Systems Design

Big Things Coming With PADS!

February 12, 2014
I’m frequently asked what’s happening with PADS? The answer – lots! At the end of the month we’ll be announcing...
By Jim Martens
< 1 MIN READ

NX Design

NX Quick Tips - Ribbon Customization

February 11, 2014
This post has moved to the NX Design Knowledge Base.  We have a few more videos coming.If there are any other topics that you would like us to cover, leave a comment below. &...
By JerrySarfati
< 1 MIN READ

Verification Horizons

DVCon 2014: Standards on Display

February 11, 2014
One of the nice things about DVCon is the update one can get from the developers of IEEE and Accellera...
By Dennis Brophy
4 MIN READ

Simcenter

See how NST use Femap to deliver high value to customers through simulation expertise

February 11, 2014
Numerical Simulation Tech Co. (NST) examines how structures perform under expected loads with the help of Femap. For more than 20 years NST’s specialist computer-aided engineering (CAE) engineers hav...
By AlRobertson
< 1 MIN READ

Corporate Blog

RIT Formula SAE team uses Femap, achieves almost 3x more accurate torsion simulation

February 11, 2014
The Formula SAE® competition is a student design competition organized by SAE International (formerly Society of Automotive Engineers).  Rochester Institute of Technology (RIT) has been a long-s...
By AlRobertson
2 MIN READ

Polarion

3D Printing: An Open Source Revolution for Hardware?

February 10, 2014
Everybody is talking about 3D-printing and 3D-printers as a revolution; one which could change our lives dramatically. What does the 3D revolution mean for industry? For large enterprises and for sma...
By entinn
2 MIN READ

Embedded Software

Embedded software engineering priorities

February 10, 2014
Apart from writing about embedded software matters, I also read widely and enjoy the perspectives offered by many of the...
By Colin Walls
2 MIN READ

Solid Edge

Debate: Direct Modeling and History-Based Modeling

February 10, 2014
This is one of those things that you'll really want to see. Dan Staples is going to join in a discussion about the relative merits of Direct and history-based 3D CAD systems. The other companies invo...
By MLombard
2 MIN READ

Polarion

New "Must-see" On-demand Webinar: ALM and PLM Convergence featuring OVUM Analyst

February 07, 2014
If someone were to tell you "you can only watch 1 Polarion webinar this year" ... this is the one to watch! We've just released the on-demand recording of the live webinar presented by OVUM Princip...
By marc.detmers
< 1 MIN READ

Latest podcast episodes


Pioneers: Startups from Dreams to Reality

Unlocking Startup Success with Strategic Branding: Big Red Jelly                                           

November 05, 2024
What are the foundational issues that often hold back growth, and how can they be resolved? How can startups achieve...
By Katherine Cerrone
< 1 MIN READ

Next Generation Design Podcast

Immersive Engineering: Revolutionizing the future of product design with Siemens and Sony

November 05, 2024
What does the next generation of product design look like in a world where the digital and physical merge? What...
By Mollie Gladden
22 MIN READ

AI Spectrum

Going beyond automation with the Industrial Copilot – Part 3

November 01, 2024
AI is a constantly changing field, sometimes with a staggering pace of innovation so when considering the development and deployment...
By Spencer Acain
< 1 MIN READ