Products

New Tech Tip showcases new NX CAM 9 milling enhancements

November 27, 2013 • < 1 MIN READ
A new Tech Tips has been posted to the Tech Tip knowledge base showcasing several new enhancements to NX CAM 9. Oliver Sing demonstrates the new multi-part programming workflow. This demo ...
By DerekHart

NX CAM Multi-part programming


A new Tech Tips has been posted to the Tech Tip knowledge base showcasing several new enhancements to NX CAM 9.

Oliver Sing demonstrates the new multi-part programming workflow. This demo alone is reason enough to view the video! Larry Moran also shows several additional milling updates useful for mold and die and complex machining applications.

Check out the NX CMM 9 what’s new replay:


http://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/Learn-about-the-new-capabilities-of-NX-CAM-9-Milling-operations/ta-p/19341

Don’t forget the previously posted Tech Tip, where Larry Moran demonstrated additional key mold and die milling topics: cut region management, combination restmilling patterns, and smooth cut connections too!

Derek Hart

I've been focused on PLM CAM software, in one way or another, since 1992, which sounds like a very long time. I've written posts, done implementation and training, served as a product manager, and as a marketer. It has all been fun and I've met a lot of interesting people and seen a lot of interesting machine shops.

More from this author

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-manufacturing/new-tech-tip-showcases-new-nx-cam-9-milling-enhancements/