Corporate Blog

Filter by:

Featured posts

The future of manufacturing is here: How Siemens and Accenture are bringing the Industrial Metaverse to life

January 5, 2026

These days, it seems AI is at the center of the conversation in both our professional and private lives. And…

By Scott Salzwedel
6 MIN READ
Siemens receives the 2024 Tech Cares Award from TrustRadius

Siemens wins the 2024 Tech Cares Award from TrustRadius

August 19, 2024

For the third consecutive year, Siemens has been awarded the Tech Cares Award from software peer review platform TrustRadius in…

By Jasmin Welter
3 MIN READ
Siemens receives the 2023 Tech Cares Award from TrustRadius

Siemens receives the 2023 Tech Cares Award from TrustRadius

August 23, 2023

For the second consecutive year, Siemens has been recognized with the Tech Cares Award from TrustRadius, a software peer review…

By Brooke Heerdegen
3 MIN READ

Latest posts

Have a (Solid Edge) seat!

Have a (Solid Edge) seat!

June 16, 2011

Munder Skiles Outdoor Furniture As people have been walking the halls of the Solid Edge ST4 Event, checking out the Product Showcase, they gravitate to two places. First, they are stopping at t…

By SusanCinadr
< 1 MIN READ
Manipulating & Reusing 3rd party CAD data within Solid Edge

Manipulating & Reusing 3rd party CAD data within Solid Edge

June 16, 2011

I sat in on Dr. Andrew Thomas’ (@asteng88) presentation yesterday afternoon. We asked Andrew to present his story because, well, It Rocks! I don’t think I can tell his story in a blog post quite as e…

By SusanCinadr
2 MIN READ
From Student to Synchronous Advocate

From Student to Synchronous Advocate

June 15, 2011

Meet Ben Sampson. (@BenCAx) Ben attended Utah State University, worked at the Space Dynamic Labs (SDL) and is now working out of the Dallas area for our partner Saratech. And he loves synchro…

By SusanCinadr
< 1 MIN READ
Cadenas for Solid Edge

Cadenas for Solid Edge

June 15, 2011

Click for full size Right after starting my new job working with Solid Edge Technology partners I became familiar with Cadenas.  There was some discussion going on between Siemens PLM and …

By MarkBurhop
2 MIN READ
User reaction, Tony Affuso at the Solid Edge ST4 Event

User reaction, Tony Affuso at the Solid Edge ST4 Event

June 15, 2011

Tony Affuso and Karsten Newbury kicked off the Solid Edge ST4 Event in Huntsville, AL this morning to a packed crowd. While I say packed, it wasn’t 1,000s of people like other user events. Our goal w…

By SusanCinadr
2 MIN READ
Solid Edge ST4 has arrived!

Solid Edge ST4 has arrived!

June 15, 2011

Solid Edge ST4 is here! It’s been a short eight months since the last release….and I’ve heard a lot of people question “why the short release cycle?”There is always a reason for what we d…

By SusanCinadr
2 MIN READ
If you are coming to the ST4 launch event…

If you are coming to the ST4 launch event…

June 13, 2011

This is me filming video Its Monday and everyone is hard at work getting ready for the ST4 Launch Event. I had to make a quick trip over to the Westin Hotel this morning and grabbed the Flip v…

By MarkBurhop
< 1 MIN READ
D-Cubed, Software and Saxophones – Q and A with Ian Morrison

D-Cubed, Software and Saxophones – Q and A with Ian Morrison

June 9, 2011

Behind the D-Cubed products there is an experienced and talented team of software engineers. In this post, I’ve dragged Ian Morrison away from the source code for a few minutes to answer some questio…

By MikeAtkins
2 MIN READ
Solid Edge, Dell Workstations, and a Comfy Chair – See them at the ST4 Launch Event

Solid Edge, Dell Workstations, and a Comfy Chair – See them at the ST4 Launch Event

June 8, 2011

Nothing goes better with your CAD software than a comfy chair and some good hardware. When we started talking about the Solid Edge ST4 Launch Event (there is still time to sign up), Dell went out of …

By MarkBurhop
4 MIN READ