Corporate Blog

Filter by:

Featured posts

Siemens receives the 2024 Tech Cares Award from TrustRadius

Siemens wins the 2024 Tech Cares Award from TrustRadius

August 19, 2024

For the third consecutive year, Siemens has been awarded the Tech Cares Award from software peer review platform TrustRadius in…

By Jasmin Welter
3 MIN READ
Siemens receives the 2023 Tech Cares Award from TrustRadius

Siemens receives the 2023 Tech Cares Award from TrustRadius

August 23, 2023

For the second consecutive year, Siemens has been recognized with the Tech Cares Award from TrustRadius, a software peer review…

By Brooke Heerdegen
3 MIN READ
Ask the Expert Solid Edge

7 Solid Edge Experts | 18 hours | Ask them anything!

March 15, 2022

The Solid Edge Community is launching the first Ask the Expert (ATE) Days. 18 consecutive hours with 7 Solid Edge experts answering your every question on March 17, 2022

By Rachel Hartley
3 MIN READ

Latest posts

NX Synchronous CAE – Part 4 – What-if Analysis

NX Synchronous CAE – Part 4 – What-if Analysis

March 18, 2009

NX Design Freedom powered by Synchronous Technology makes what-if studies very easy.  In Part 4 of our series, we show how CAE users can delete, modify, and move features without needing an in-d…

By JerrySarfati
< 1 MIN READ
NX Synchronous CAE – Part 3 – CFD

NX Synchronous CAE – Part 3 – CFD

March 13, 2009

This is part 3 in the series “NX Synchronous CAE”.  In this post, I would like to discuss how Synchronous Technology can be useful in CFD (computational fluid dynamics) Analysts face a unique…

By JerrySarfati
< 1 MIN READ
Make Your Way to Music City for PLM Connection

Make Your Way to Music City for PLM Connection

March 12, 2009

In 12 weeks and counting, quite a few of us will be in Nashville, Tenn., for the annual Siemens PLM Connection event. It’s the largest gathering of our customers around the globe. If you use any …

By Dora Smith
< 1 MIN READ
Ride The Rails at 350 kph With Innovative Rail Design

Ride The Rails at 350 kph With Innovative Rail Design

March 9, 2009

  The first time I rode the TGV from Geneva, Switzerland, to Paris, France, I was amazed at the speed (~300 kph). But today’s high-speed trains go even faster. One of our NX customers…

By Dora Smith
2 MIN READ
Pharma-Bio Simulation

Pharma-Bio Simulation

March 3, 2009

  I’m no CAE analyst – although I could play one on TV – but with a father in refrigeration, I’ve always been interested in the intricacies of heat flow and transfer. Many of today’s im…

By Dora Smith
2 MIN READ
NX Synchronous CAE;  Part 2

NX Synchronous CAE;  Part 2

February 26, 2009

In Part 1 of my NX Synchronous CAE post,  I touched on how an analyst can make simple changes to non-NX design geometry to prepare the model for analysis. In this post I want to share how you ca…

By JerrySarfati
< 1 MIN READ
Synchronous Technology in History-Based Models

Synchronous Technology in History-Based Models

February 24, 2009

While there has been quite a bit of discussion recently about our synchronous technology in the history-free modeling mode,  I’d like to share how it can also be used in the history-based modeli…

By JerrySarfati
< 1 MIN READ
Traditional Versus Synchronous

Traditional Versus Synchronous

February 15, 2009

There continues to be a lot of discussion on merits of history free (Synchronous technology for Siemens PLM products) versus traditional history based modeling. There are many points at which you can…

By MarkBurhop
2 MIN READ
NX Synchronous CAE

NX Synchronous CAE

February 12, 2009

Synchronous Technology has been talked about intensively in the design community.  But did you know that it also impacts other areas – such as CAE? NX’s Design Freedom powered by Synchronous …

By JerrySarfati
< 1 MIN READ