In part 2 of this blog series we covered the most important step in using routing automation, creating proper design…
Microwave electrical design is not new to the industry, it’s been around since the 1940’s. However very few designers have…
In part 1 of this blog series we started the PCB design process by looking at part placement automation. Let’s…
Over my 25 plus years of being a PCB designer I could not imaging going back to designing a PCB…
Designers today are asked to do more in less time. As such we need to adapt our design process to…
Over my 25+ years of designing PCB’s I’ve always been driven to make the job of designing a PCB as…
In the second of this two-part blog series, we’ll talk about 3D placement and automated design rule checking. To read…
In this two-part blog series, we’ll examine the necessity and benefits of ECAD/MCAD collaboration. This first blog describes the need…
The April 17th rigid-flex webinar had record attendance from companies all around the world. As such, we had lot’s of…
