We’re getting ready for IMTS! See you in Chicago next week!

As you can see from the photos below, we are almost done building the Siemens booths at the International Manufacturing Technology Show (IMTS) in Chicago!


Siemens PLM Software will be represented in two locations in the East Building at McCormick Place.


1) Welcome to the smart, flexible and connected digital machine shop of the future! At its heart is the digital twin – of the product, production system and its performance. See how a digital thread is woven through every step of the manufacturing process and closes the loop between the virtual and real worlds of manufacturing. There will also be a stage show presentation, “Digitalize Manufacturing,” highlighting the machine shop of the future, each day at 12:00 p.m. See this and more in the Siemens Industry booth at E-4502


2) Our NX CAD/CAM and CMM solutions will be displayed in booth E-4500, along with our Advanced Machinery, Additive Manufacturing (3D Printing) and Solid Edge technologies showcasing our capabilities for the machine tool industry.


Siemens will host four different, 30-minute digitalization and machine tool manufacturing booth tours each day during the show: 1) Digital Machine Shop; 2) Digital Mold Shop; 3) Digitalization for Machine Tool Builder; and 4) Digital Innovation.


We look forward to helping you learn more about our solutions and how they can help you to become more competitive, efficient and profitable.


For more information about Siemens presence at the show, visit our IMTS page.


FullSizeRender.jpgSiemens booth prep at IMTS 2016


IMG_0407.jpgSiemens booth prep at IMTS 2016


IMG_0397.jpg


IMG_0408.jpgSiemens booth prep at IMTS 2016


IMG_0415.jpgSiemens booth signage at IMTS 2016

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-manufacturing/were-getting-ready-for-imts-see-you-in-chicago-next-week/