Tech Tip: Simulate any G-code with NX CAM’s Machine Tool Simulation

Run simulation


G-code driven machine tool simulation inside NX CAM

Whether you need to simulate G-code that was manually programmed, output from another CAM software system or from NX, you can do it inside NX. Learn how by following the procedure described in the Tech Tip, How to simulate any G-code file in NX CAM.

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-manufacturing/tech-tip-simulate-any-g-code-with-nx-cams-machine-tool-simulation/