Download Work-Holding Devices for Your NX CAM Reuse Library

By Aaron Frankel

CAM-Reuse-Composite.pngYou may have spotted us using hardware and work-holding devices from the Reuse Library in our Tech Tip webinars. Some of you asked if these components could be made available for download. We thought this was a great request. So here they are.

Find milling vises, clamps and more.

Instructions for downloading and installing the NX CAM Reuse Library Samples are posted in the Tech Tips Knowledge Base – CAM Reuse Library Samples: Download setup hardware and work-holding devices. You’ll need a valid customer webkey to download the data. The post includes a short tech tip video that walks you through installing and using the samples.

We also produced a tech tip on How to create a CAM component for your Reuse Library.

Looking for a specific component?

Are you looking for a specific component for your library? Do you have a component that you’d like to share with others? Let your community know in the NX for Manufacturing Forum. Someone who can help might be listening.

Credits: Michael Mannino, one of our CAM experts based the USA, is the originator of this sample library and was pleased to hear about your interest. He jumped at the opportunity to share his collection. Thanks for sharing Mike!

REGISTER for NX for Manufacturing Tech Tips webinars.

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at