Products

Create associative manufacturing models in NX CAM with Part Modules

By DerekHart

Master Model use in Manufacturing


NX provides the CAD/CAM integration needed to build fully associative manufacturing models, including in-process models and fixtures. One way to build these associative setups in a single part file is to use the Part Modules function. Bryan Dreibelbiss presents this lesser-known modeling method and shows how to build the associative manufacturing models you need.

See it here:


http://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/Quickly-build-an-associative-set-of-fixtures-using-Part-Modules/ta-p/23141

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-manufacturing/create-associative-manufacturing-models-in-nx-cam-with-part-modules/