Go Right to the Top: “Ask Andy”

As users of EDA tools, when you have questions, you probably go to one of two sources:  customer support or your sale person.  These are two valuable resources, and depending on what information you’re looking for, the correct source of information.  But what about “going right to the top”?   What if you have a higher level business issue you want a response to?

Welcome to “Ask Andy”!  This forum on Mentor’s PCB Community gives you direct access to Andy Perlowski, the PADS Product Line Director.  He’s available to answer any of your questions.  (Please remember, technical questions should still be sent to CSD, and sales questions to your sales person)

Andy will be sure to give you direct answers to you questions.

Ask Andy can be found at:  http://communities.mentor.com/mgcx/community/pcb/design_tasks/pads/ask_andy



Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/electronic-systems-design/2009/07/27/go-right-to-the-top-ask-andy/