Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Embedded Software

There was no big bang

September 26, 2013
There have been many theories and stories about where the Universe came from. The most widely accepted model is the...
By Colin Walls
2 MIN READ

Designcenter Solid Edge

On the Edge Returns

September 26, 2013
The On The Edge blog is becoming active again. The main audience of that blog will be non-Solid Edge users, to act as an outreach tool, however everyone from expert to the simply curious are welcome....
By MLombard
< 1 MIN READ

Polarion

The Bear's favorite 2-minute movie

September 25, 2013
[embed width="640" height="330"]http://youtu.be/fH7cROc9HNY[/embed] Polarion's value extends far beyond savvy software solutions. We are constantly working to bring you relevant info and online le...
By JustineB
< 1 MIN READ

Electronic Systems Design

PCB West and Tradeshows

September 25, 2013
PCB West is this week in Santa Clara, historically the big tradeshow for electronic design professionals in Silicon Valley.  Are...
By Jim Martens
< 1 MIN READ

NX Manufacturing

Model Based Enterprise: A look at the future of PLM Manufacturing

September 25, 2013
Siemens PLM Software has understood the value of manufacturers working directly from the 3D model for a long time. The US Department of Defense, National Institute of Science and Technology, and othe...
By DerekHart
< 1 MIN READ

NX Manufacturing

Pencil Milling Part 2

September 25, 2013
In this post, I want to explain some of the options for working with Flow Cut.  I find that new users consistently struggle with understanding some of these options. First up is Max...
By wrightj
2 MIN READ

Designcenter Solid Edge

Mating Parts in the Engine

September 24, 2013
When we left our engineer friend last week, he was starting to work on the engine of his pressure washer, but it was such a mess in his old CAD software that he just decided to open it up in Solid Ed...
By MLombard
3 MIN READ

Designcenter

The making of an F1 Car - Design and R&D

September 24, 2013
A formula one car takes five months to design and develop. Over 300 designers, aerodynamicists and machinists worked on creating the RB9.Its purpose to win the 2013 Formula one world champions...
By JerrySarfati
< 1 MIN READ

Polarion

New FDA Medical Device ID System Highlights PALM Trend

September 24, 2013
By Stefano Rizzo The U.S. Food and Drug Administration has announced finalization of a new new system to identify medical devices. The new requirements for medical devices to comply with the FDA's ...
By rizzos
< 1 MIN READ

Latest podcast episodes


The Industry Forward Podcast

Powering the future of humanoid robotics

July 24, 2026
Humanoid robots must operate untethered and move freely in factories, making battery performance essential. To make humanoids practical for large-scale...
By Bianca Ward
< 1 MIN READ

The Industry Forward Podcast

Thanks for the reactor. Now where is the digital twin?

July 22, 2026
What if equipment came with a digital twin tailor made – down to every weld?
By Shawn Wasserman
< 1 MIN READ

3D IC

The wire problem: Why advanced packaging is the only answer left as Moore's Law runs out

July 22, 2026
“The average user uses only 30% of the transistors in their cell phone. If you could now affordably reduce the...
By Tova Levy
2 MIN READ