Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


NX Manufacturing

Model Based Enterprise: A look at the future of PLM Manufacturing

September 25, 2013
Siemens PLM Software has understood the value of manufacturers working directly from the 3D model for a long time. The US Department of Defense, National Institute of Science and Technology, and othe...
By DerekHart
< 1 MIN READ

NX Manufacturing

Pencil Milling Part 2

September 25, 2013
In this post, I want to explain some of the options for working with Flow Cut.  I find that new users consistently struggle with understanding some of these options. First up is Max...
By wrightj
2 MIN READ

Solid Edge

Mating Parts in the Engine

September 24, 2013
When we left our engineer friend last week, he was starting to work on the engine of his pressure washer, but it was such a mess in his old CAD software that he just decided to open it up in Solid Ed...
By MLombard
3 MIN READ

NX Design

The making of an F1 Car - Design and R&D

September 24, 2013
A formula one car takes five months to design and develop. Over 300 designers, aerodynamicists and machinists worked on creating the RB9.Its purpose to win the 2013 Formula one world champions...
By JerrySarfati
< 1 MIN READ

Polarion

New FDA Medical Device ID System Highlights PALM Trend

September 24, 2013
By Stefano Rizzo The U.S. Food and Drug Administration has announced finalization of a new new system to identify medical devices. The new requirements for medical devices to comply with the FDA's ...
By rizzos
< 1 MIN READ

Solid Edge

CAMWorks on the job training: - by Michael Buchli

September 24, 2013
[editor]: This article was guest written by Michael Buchli, author of The CAMWorks Guide. Michael has worked for CAD resellers, but is now working in industry. Thanks to Michael for submitting this a...
By MLombard
6 MIN READ

Simcenter

Using 3DSync for Geometry Simplification and Edits

September 23, 2013
I usually write for CAD users, so writing for folks who lean more toward the analyst side and who consider CAD to be a secondary skill is a bit new but bear with me. I’m at least still writing about ...
By MLombard
4 MIN READ

NX Design

Announcing the Chicago/Wisconsin Regional Users Meetings in Gurnee, IL...

September 23, 2013
Did you miss the Siemens PLM Connections held this past June in Dallas? Are you looking for more information about the upcoming software releases from Siemens PLM? Would you like to meet and network ...
By JohnRBaker
< 1 MIN READ

Embedded Software

Smart Energy panel

September 23, 2013
Smart Energy is a topic that I have discussed here a bit – here and here for example. It is...
By Colin Walls
< 1 MIN READ

Latest podcast episodes


Digital Transformation Podcast

Industrial machinery and AI – Episode 6

December 05, 2025
In the seventh episode of industrial machinery and AI series in our Digital Transformation podcast, host Chris Pennington, global industry...
By Bianca Ward
< 1 MIN READ

Bugged Out

Accelerating DFT Sign-off: Getting the Bugs Out of Complex Chips

November 25, 2025
Join host Harry Foster on Bugged Out as he dives deep into the world of functional verification with special guest...
By Julie Weber
2 MIN READ

Bugged Out

Better Stimulus Generation Through AI: Shaping the Future of Functional Verification

November 25, 2025
Join host Harry Foster on Bugged Out as he welcomes industry veteran Tom Fitzpatrick to explore the transformative power of...
By Julie Weber
2 MIN READ