Products

NX Quick Tips: Extraction Path

June 5, 2014 • < 1 MIN READ
This post has moved to the NX Design Knowledge Base.  The complete NX Quick Tips video series can be  found here.  Jerry
By JerrySarfati

Extraction PathThis post has moved to the NX Design Knowledge Base. 

The complete NX Quick Tips video series can be found here.  

Jerry

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-design/nx-quick-tips-extraction-path/