Products

NX Quick Tips – Using xform for initial concept design

March 11, 2014 • < 1 MIN READ
This post has moved to the NX Design Knowledge Base.  The compete NX Quick Tips series can be  found here. Jerry
By JerrySarfati

X-formThis post has moved to the NX Design Knowledge Base. 


 


The compete NX Quick Tips series can be found here. 


 


Jerry

Jerry Sarfati

What to read next:
This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/designcenter/nx-quick-tips-using-xform-for-initial-concept-design/