{"id":74364,"date":"2026-05-13T05:24:24","date_gmt":"2026-05-13T09:24:24","guid":{"rendered":"https:\/\/blogs.sw.siemens.com\/simcenter\/?p=74364"},"modified":"2026-05-13T05:29:57","modified_gmt":"2026-05-13T09:29:57","slug":"industrial-quality-testing-days","status":"publish","type":"post","link":"https:\/\/blogs.sw.siemens.com\/simcenter\/industrial-quality-testing-days\/","title":{"rendered":"Industrial quality testing days 2026: Applying noise and vibration testing in production"},"content":{"rendered":"\n

\ud83d\udccdLeuven, Belgium<\/strong><\/p>\n\n\n\n

\ud83d\udcc5 October 6\u20137, 2026<\/strong><\/p>\n\n\n\n

\n
Register<\/a><\/div>\n\n\n\n
Agenda<\/a><\/div>\n<\/div>\n\n\n\n

Why is industrial quality testing important?<\/h2>\n\n\n\n

In serial production, end\u2011of\u2011line quality testing must deliver objective, repeatable, and production\u2011ready decisions within tight cycle times. Many defects, however, do not present themselves through visual inspection or simple functional checks. Instead, they manifest as subtle changes in noise, vibration, or dynamic behavior, making them difficult to detect reliably without dedicated measurement and analysis concepts.<\/p>\n\n\n\n

Industrial Quality Testing<\/a> (IQT) addresses this challenge by using noise and vibration\u2011based measurements as physically measurable indicators of product quality. By combining industrial sensors, robust data acquisition, and application\u2011specific analysis workflows, IQT enables manufacturers to translate complex dynamic behavior into clear pass\/fail criteria suitable for end\u2011of\u2011line and serial testing environments.<\/p>\n\n\n\n

Within the Simcenter portfolio, Simcenter Anovis<\/a> plays a central role in enabling this approach. Simcenter Anovis is specifically designed for industrial noise and vibration\u2011based quality testing, supporting non\u2011destructive testing (NDT), blocked forces approach, and advanced NVH metrics in a production context. It allows engineers to configure complete end\u2011of\u2011line test systems that are robust, repeatable, and scalable, while remaining closely aligned with real production constraints.<\/p>\n\n\n\n

To demonstrate how industrial noise and vibration\u2011based quality testing can be implemented in real production environments, Siemens is organizing the Industrial Quality Testing Days<\/strong> \u2014 a two\u2011day, application\u2011driven event focused on end\u2011of\u2011line and non-destructive testing.<\/p>\n\n\n\n

The event is designed to bridge the gap between measurement theory and production reality. Rather than generic presentations, participants will work with real test setups, industrial hardware, sensors, and Simcenter Anovis software workflows, seeing first\u2011hand how end\u2011of\u2011line quality systems are configured, validated, and operated in practice. The emphasis is on robustness, repeatability, and confidence in defect detection, not laboratory performance.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Day 1: Foundations and live demonstrations<\/strong><\/h2>\n\n\n\n

The first day establishes the technical foundation for noise and vibration\u2011based industrial quality testing. It starts with an overview of common industrial applications and quality testing requirements, followed by key concepts in measurement, sensing, and data interpretation. The focus then narrows to the principles required to design reliable end\u2011of\u2011line test setups for defect detection in serial production.<\/p>\n\n\n\n

Participants will explore:<\/p>\n\n\n\n