{"id":9830,"date":"2024-05-02T13:48:02","date_gmt":"2024-05-02T17:48:02","guid":{"rendered":"https:\/\/blogs.sw.siemens.com\/nx-design\/?p=9830"},"modified":"2026-03-26T04:38:16","modified_gmt":"2026-03-26T08:38:16","slug":"nx-tips-and-tricks-creating-parts","status":"publish","type":"post","link":"https:\/\/blogs.sw.siemens.com\/nx-design\/nx-tips-and-tricks-creating-parts\/","title":{"rendered":"NX | Tips and Tricks | Creating new parts and drawings"},"content":{"rendered":"\n<p>Our latest NX\u2122 software Tips and Tricks video discusses how to create new parts and drawings with Teamcenter inside of NX.<\/p>\n\n\n\n<p>This process is similar to using a typical Template, though there are a few extra things to pay attention to. Watch the video below to discover the changes involved in creating new designs and drawings with Teamcenter inside of NX.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"NX | Tips and Tricks | Creating new parts and drawings\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/-OGurrKQU9s?list=PL1m1vu8_quoDVJfmPp3FL9700HGM_LK9P\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Getting started<\/h2>\n\n\n\n<p>As with a traditional NX workflow, the process begins by selecting &#8220;File&#8221; and then &#8220;New&#8221;. This opens a new window containing the typical template assortment, but there are a few additional options in some of the windows. Some of these additional options include the ability to add new parts to existing projects, organization by ID and revision number; and drawing relationships.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Adding new parts to projects<\/h2>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<p>The ability to add new parts to existing projects is one of the first options that the Tips and Tricks video discusses. This feature is accessible from the Other Parameters section of the template window. When selected, it prompts you to choose a previously created project.<\/p>\n\n\n\n<p>Projects provide an excellent method for staying organized in large-scale operations. They save time and ensure tasks are streamlined for effective completion, ultimately enhancing productivity and project success.<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"551\" height=\"178\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/projects.png\" alt=\"When creating new parts, you can assign the files to existing projects\" class=\"wp-image-9841\" style=\"width:416px;height:auto\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/projects.png 551w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/projects-300x97.png 300w\" sizes=\"auto, (max-width: 551px) 100vw, 551px\" \/><figcaption class=\"wp-element-caption\">You can assign new parts to existing projects<\/figcaption><\/figure><\/div><\/div>\n<\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Creating names and attributes<\/h2>\n\n\n\n<p>Creating names and attributes is another important aspect of starting a new design. To select the name and attributes for our new part, we can double-click the red asterisk and the system will automatically assign the item, revision, and name according to the naming rules defined in Teamcenter.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"764\" height=\"251\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/name-and-attributes.png\" alt=\"\" class=\"wp-image-9842\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/name-and-attributes.png 764w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/name-and-attributes-300x99.png 300w\" sizes=\"auto, (max-width: 764px) 100vw, 764px\" \/><\/figure><\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\">\n<p><br>If you have additional attributes mapped to Teamcenter, you can edit them from the secondary attributes button shown here on the left.<\/p>\n\n\n\n<p><br>Adding additional attributes ensures that your projects remain organized and cataloged in a manner that fits your design needs.<\/p>\n<\/div>\n<\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Relationships for drawings<\/h2>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<p><br>Up until now, all the settings and options mentioned have been universal to all templates. However, this next setting is specific to just creating new drawings.<\/p>\n\n\n\n<p>When you open the drawing template, you&#8217;ll find a column in the middle labeled &#8220;relationship.&#8221; You can use this column to dictate whether NX files the new drawing dataset under the same item revision as the design or its own separate item revision.<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"573\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-1024x573.png\" alt=\"\" class=\"wp-image-9844\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-1024x573.png 1024w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-300x168.png 300w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-768x430.png 768w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-395x222.png 395w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing-900x504.png 900w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/new-drawing.png 1341w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n<\/div>\n\n\n\n<p><br>The specification relationship will create the drawing dataset under the same item revision as the design. On the other hand, the master relationship will create its own item revision, which will be separate from the design item revision. Each option offers its own benefits, so it&#8217;s up to you to decide what is most appropriate for your business process.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What&#8217;s next<\/h2>\n\n\n\n<p><br>After creating your new parts and drawings, it&#8217;s now time to begin the design process. Anytime you are ready to start a new design, you can repeat the same steps we&#8217;ve covered in the video. Over the next few weeks, we&#8217;ll delve into revising designs, locating data, and working in assembly contexts with Teamcenter inside of NX. Keep an eye out for these upcoming Tips and Tricks videos to discover how you can advance your workflows in the later stages of the design process.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\" \/>\n\n\n\n<h2 class=\"wp-block-heading\">Continue your journey with NX<\/h2>\n\n\n\n<div style=\"height:50px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<h2 class=\"wp-block-heading\">Watch the Upgrading to a new version Tips and Tricks video here \u25b6\ufe0f<\/h2>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<h2 class=\"wp-block-heading\">Watch the Template Parts Tips and Tricks video here \u25b6\ufe0f<\/h2>\n<\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"NX | Tips and Tricks | Upgrading to a new version\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/fsTCAua9O1Y?list=PL1m1vu8_quoDVJfmPp3FL9700HGM_LK9P\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"NX | Tips and Tricks | Template Parts\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/MdzgyoQmdc8?list=PL1m1vu8_quoDVJfmPp3FL9700HGM_LK9P\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n<\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button has-custom-width wp-block-button__width-100\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.youtube.com\/playlist?list=PL1m1vu8_quoDVJfmPp3FL9700HGM_LK9P\" target=\"_blank\" rel=\"noopener\">Take a look at the full Tips &amp; Tricks playlist on YouTube \u25b6\ufe0f<\/a><\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-media-text has-media-on-the-right is-stacked-on-mobile has-background\" style=\"background:linear-gradient(135deg,rgb(0,255,185) 0%,rgb(0,230,230) 100%)\"><div class=\"wp-block-media-text__content\">\n<h2 class=\"wp-block-heading\"><strong>Take me to the NX design blog \ud83d\udcda<\/strong><\/h2>\n<\/div><figure class=\"wp-block-media-text__media\"><a href=\"https:\/\/blogs.sw.siemens.com\/nx-design\/\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"587\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog-1024x587.png\" alt=\"\" class=\"wp-image-8926 size-full\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog-1024x587.png 1024w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog-300x172.png 300w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog-768x441.png 768w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog-900x516.png 900w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/12\/designblog.png 1536w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/a><\/figure><\/div>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button has-custom-width wp-block-button__width-100\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/community.sw.siemens.com\/s\/topic\/0TO4O000000MihTWAS\/nx-design\" target=\"_blank\" rel=\"noopener\">Visit the NX design community \ud83d\udcf1<\/a><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Our latest NX\u2122 software Tips and Tricks video discusses how to create new parts and drawings with Teamcenter inside of&#8230;<\/p>\n","protected":false},"author":99378,"featured_media":9835,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"spanish_translation":"","french_translation":"","german_translation":"","italian_translation":"","polish_translation":"","japanese_translation":"","chinese_translation":"","footnotes":""},"categories":[166,162,1,167],"tags":[3,501,533],"industry":[],"product":[],"coauthors":[6694],"class_list":["post-9830","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tips-tricks","category-learning-resources","category-news","category-video","tag-cad","tag-nx","tag-nxmakesitreal"],"featured_image_url":"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2024\/04\/Blog_Header_TipsTricks_Creating_New_Parts_and_Drawings.png","_links":{"self":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/9830","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/users\/99378"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/comments?post=9830"}],"version-history":[{"count":5,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/9830\/revisions"}],"predecessor-version":[{"id":9855,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/9830\/revisions\/9855"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/media\/9835"}],"wp:attachment":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/media?parent=9830"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/categories?post=9830"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/tags?post=9830"},{"taxonomy":"industry","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/industry?post=9830"},{"taxonomy":"product","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/product?post=9830"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/coauthors?post=9830"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}