{"id":7100,"date":"2023-04-06T11:58:08","date_gmt":"2023-04-06T15:58:08","guid":{"rendered":"https:\/\/blogs.sw.siemens.com\/nx-design\/?p=7100"},"modified":"2026-03-26T04:34:01","modified_gmt":"2026-03-26T08:34:01","slug":"model-based-definition-feature-templates-tips-and-tricks","status":"publish","type":"post","link":"https:\/\/blogs.sw.siemens.com\/nx-design\/model-based-definition-feature-templates-tips-and-tricks\/","title":{"rendered":"MBD Feature Templates | Tips and Tricks"},"content":{"rendered":"\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\">\n<p>We&#8217;re back with the latest and greatest when it comes to our NX\u2122 software tips and tricks. In case you have missed it, we continue to bring you a weekly episode of useful workflow tips at your disposal. Head on over to our <a href=\"https:\/\/blogs.sw.siemens.com\/nx-design\/\" data-type=\"URL\" data-id=\"https:\/\/blogs.sw.siemens.com\/nx-design\/\">NX Design Tips and Tricks blog site<\/a> to read more.<\/p>\n\n\n\n<p>In our latest episode, we take a look at Model Based Definition with Feature Templates. Without further ado, let&#8217;s take a look!<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"NX | Tips and Tricks | MBD with Feature Templates\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/p4k4iclDEJc?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><figcaption class=\"wp-element-caption\">NX | Tips and Tricks | MBD with Feature Templates<\/figcaption><\/figure>\n<\/div>\n<\/div>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Mapping a Feature Template library and customer defaults<\/h2>\n\n\n\n<p>Before starting, it&#8217;s important to ensure that you map the Feature Template library you will use, as well as any customer defaults. Ensure that you map and name your libraries within NX in an easy-to-access area. Additionally, if you have a Teamcenter integration, that&#8217;s not a problem! You can map to the feature template libraries that are enabled within Teamcenter. A key thing to remember is that you need to restart NX for the changes to take effect. If there are any tweaks you want to make to the feature before making a template, click:<\/p>\n\n\n\n<p><strong><em>Home &gt; Tools &gt; Parts and Features &gt; Feature Templates <\/em><\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"572\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-1024x572.png\" alt=\"\" class=\"wp-image-7105\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-1024x572.png 1024w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-300x168.png 300w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-768x429.png 768w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-1536x858.png 1536w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-2048x1143.png 2048w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-395x222.png 395w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Mapping-a-Feature-Template-library-and-customer-defaults-900x503.png 900w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"has-background\" style=\"background:linear-gradient(135deg,rgb(0,230,230) 1%,rgb(0,255,185) 100%)\"><strong><em>REMEMBER<\/em><br><em>If you use a dimension that is inherited from sketches, it can be used more effectively with Feature Templates.<\/em><\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<h2 class=\"wp-block-heading\">Create your Feature Template<\/h2>\n\n\n\n<p>With the your Feature Template Library now prepped, you are ready to start creating the template by selecting the relevant features within NX. There are a range of elements you can include when creating your Feature Templates, but for this example, we&#8217;ve selected CSYS (coordinate system) Placement, the port, and finally created a hole and unite. The features that are enabled in this instance are all Add dependent features, meaning they will all be included in the final template.<\/p>\n\n\n\n<p>Additionally, we also recommend you check the &#8216;Add Dependent PMI&#8217; checkbox at the bottom of the dialog box. By doing so, you will be automatically adding any associated PMI to your template, reducing the need to manually add them at a later date.<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-medium\"><img loading=\"lazy\" decoding=\"async\" width=\"140\" height=\"300\" src=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template-140x300.png\" alt=\"\" class=\"wp-image-7108\" srcset=\"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template-140x300.png 140w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template-476x1024.png 476w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template-768x1651.png 768w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template-714x1536.png 714w, https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Create-your-Feature-Template.png 859w\" sizes=\"auto, (max-width: 140px) 100vw, 140px\" \/><\/figure>\n<\/div>\n<\/div>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Configure your user interface<\/h2>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<p>A vitally important piece to the puzzle is ensuring that you configure your user interface so that it is easier to work with the Feature Template. Whilst it is an incredibly powerful tool to use, they can be complex; so deploying specific workflow aspects to make your life easier is something to consider. Go ahead and change the title to select an existing CSYS. By doing so ,you will be adding a connecting port to the design geometry within NX. On completion of this task, you&#8217;ll be able to see the name of the user interface has updated immediately.<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<p class=\"has-background\" style=\"background:linear-gradient(135deg,rgb(0,230,230) 0%,rgb(0,255,185) 100%)\"><strong><em>WHY SHOULD I MAKE THIS CHANGE?<br>Changing the template name essentially will change the file name of the save, as well as updating your user interface. Utilizing title name changes are more helpful for anyone using Feature Templates; they enable greater organization of your template and ultimately automate a lot of the processes for you.<\/em><\/strong><\/p>\n<\/div>\n<\/div>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<h2 class=\"wp-block-heading\">Defining your PMI orientation<\/h2>\n\n\n\n<p><\/p>\n\n\n\n<p>You&#8217;re almost at the point where you can save your template, but there&#8217;s one more action we recommend you take before doing so. You want to ensure that you define the orientation of the PMI using existing CSYS which has a similar orientation to your current design. By taking this step, the feature will come in once you have placed it. To do this:<\/p>\n\n\n\n<p> From the <strong>Feature Reference dialog box<\/strong>, select your <strong>Template Features &gt; Click OK<\/strong>.<\/p>\n\n\n\n<p>With that step now complete, go ahead and save your your template.<\/p>\n\n\n\n<p><\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<h2 class=\"wp-block-heading\">Placing your Feature Template into another part<\/h2>\n\n\n\n<p>We&#8217;re almost there! With the template now ready to use, we&#8217;re going to show you the importance of opening another part to add the feature to. Remember the port we created earlier on? Well, that will appear in your reuse library, and can simply be dragged and dropped into your user window. And that&#8217;s that! You now have created a part that has Model Based Definition included!<\/p>\n<\/div>\n<\/div>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">MBD Feature Templates | Tips and Tricks YouTube video<\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"NX | Tips and Tricks | MBD with Feature Templates\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/p4k4iclDEJc?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><figcaption class=\"wp-element-caption\">NX | Tips and Tricks | MBD with Feature Templates<\/figcaption><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-text-color has-alpha-channel-opacity has-background is-style-wide\" style=\"background-color:#00ffb9;color:#00ffb9\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Continue your journey with NX<\/h2>\n\n\n\n<p>We hope you have taken some key insights from this latest tips and tricks episode. Be sure to check next week for the next episode!<\/p>\n\n\n\n<p>Meanwhile, why don&#8217;t you continue your journey with NX? Take a look at some key call to actions listed below \ud83d\udc47<\/p>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button has-custom-width wp-block-button__width-100\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/plm.sw.siemens.com\/en-US\/nx\/cad-cam-software-trials\/\" target=\"_blank\" rel=\"noopener\">Try NX free for 30 days \ud83c\udd93<\/a><\/div>\n\n\n\n<div class=\"wp-block-button has-custom-width wp-block-button__width-100\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.dex.siemens.com\/plm\/nx-cloud-connected-products?viewState=ListView&amp;cartID=&amp;portalUser=&amp;store=&amp;cclcl=en_US&amp;selected=plm\" target=\"_blank\" rel=\"noopener\">Buy NX here \ud83d\udcb5<\/a><\/div>\n\n\n\n<div class=\"wp-block-button has-custom-width wp-block-button__width-100\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/blogs.sw.siemens.com\/nx-design\/category\/tips-tricks\/\">Read about other tips and tricks on our NX design blog \ud83d\udcda<\/a><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>We&#8217;re back with the latest and greatest when it comes to our NX\u2122 software tips and tricks. In case you&#8230;<\/p>\n","protected":false},"author":69056,"featured_media":7101,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"spanish_translation":"","french_translation":"","german_translation":"","italian_translation":"","polish_translation":"","japanese_translation":"","chinese_translation":"","footnotes":""},"categories":[1,81,166],"tags":[501,533,546],"industry":[],"product":[],"coauthors":[549],"class_list":["post-7100","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","category-featured","category-tips-tricks","tag-nx","tag-nxmakesitreal","tag-tips-and-tricks"],"featured_image_url":"https:\/\/blogs.sw.siemens.com\/wp-content\/uploads\/sites\/2\/2023\/04\/Blog_Header_MBD_Feature_Templates.png","_links":{"self":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/7100","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/users\/69056"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/comments?post=7100"}],"version-history":[{"count":5,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/7100\/revisions"}],"predecessor-version":[{"id":7148,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/posts\/7100\/revisions\/7148"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/media\/7101"}],"wp:attachment":[{"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/media?parent=7100"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/categories?post=7100"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/tags?post=7100"},{"taxonomy":"industry","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/industry?post=7100"},{"taxonomy":"product","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/product?post=7100"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/blogs.sw.siemens.com\/nx-design\/wp-json\/wp\/v2\/coauthors?post=7100"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}