Products

NX 9 – Flattening and Forming

November 6, 2013 • < 1 MIN READ
Derek England of Siemens PLM software explains some of the new enhancements in NX9 for Flattening and Forming.He also gives examples of this can be used for the Aerospace Industry. &nbs...
By JerrySarfati

Derek England of Siemens PLM software explains some of the new enhancements in NX9 for Flattening and Forming.He also gives examples of this can be used for the Aerospace Industry.


(view in My Videos)

Jerry

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.sw.siemens.com/nx-design/nx-9-flattening-and-forming/