{"id":4621,"date":"2021-07-09T15:24:41","date_gmt":"2021-07-09T19:24:41","guid":{"rendered":"https:\/\/blogs.sw.siemens.com\/nx-design\/?p=4621"},"modified":"2026-03-26T04:30:42","modified_gmt":"2026-03-26T08:30:42","slug":"nx-assemblies-updates-to-save-time-and-increase-performance","status":"publish","type":"post","link":"https:\/\/blogs.sw.siemens.com\/designcenter\/nx-assemblies-updates-to-save-time-and-increase-performance\/","title":{"rendered":"NX Assemblies: Updates to save time and increase performance"},"content":{"rendered":"\n

With this latest release of NX Assemblies, you can expect new enhancements to increase performance of our application. Expect time savings for you as well.<\/p>\n\n\n\n

Simplify Assembly<\/h4>\n\n\n\n
\"\"<\/figure><\/div>\n\n\n\n

The “Simplify Assembly<\/em>” command (which was introduced in our December 2020 update) has been improved by several customer requested enhancements.<\/a> The process for simplifying assemblies is made easy. <\/p>\n\n\n\n

What’s new? <\/p>\n\n\n\n

\u2022Selection Intent supported in face & body selection
\u2022Support for holes with blended bottom
\u2022Users can \u2018abort\u2019 the simplification solve
\u2022Improved blend removal, internal body removal & error reporting \u2022Support for convergent bodies & convergent with mixed geometry<\/p>\n\n\n\n

Please see below for a demonstration.<\/p>\n\n\n\n

\"\"<\/a>
Simplified Assembly Demonstration <\/figcaption><\/figure>\n\n\n\n

New! Assemble Command<\/h4>\n\n\n\n

With the latest update to your software you will find an all new command. The new Assemble command allows drag-and-drop assembly creation and editing ability. Assemble command is focused on allowing users to easily perform the most common assembly creation and edit workflows with the least amount of effort.<\/p>\n\n\n\n

What’s new?<\/p>\n\n\n\n

\u2022Direct component manipulation with mouse
\u2022Constraints created as part of drag-and-drop
\u2022Object to action constraint creation supported
\u2022Automatic in view scattering of components<\/p>\n\n\n\n

Please watch below for a demonstration.<\/p>\n\n\n\n

\"\"<\/a>
Assemble Command Demonstration <\/figcaption><\/figure>\n\n\n\n

Multi-User Design supports collaboration with unloaded parts <\/h4>\n\n\n\n

Users can save time by only loading parts they are working on but can be notified about changes in any parts they are interested in. <\/p>\n\n\n\n

The enhancements here expand on the capabilities of multi-user design introduced in December 2020 update. The enhancement is to allow users to be notified about changes to unloaded parts.

What’s new?
\u2022Ability to subscribe to unloaded parts \u2013 receive check-in, check-out and save notifications
\u2022Explicitly subscribed part will be followed even after they are closed
\u2022Users have the option to load parts from the notification
\u2022Notification Center supports multiple card arrangement options<\/p>\n\n\n\n

Please watch below for a demonstration.<\/p>\n\n\n\n

\n